Mechanical Engineering

Sponsored Research & Consultancy

Home / Dept. of Mechanical Engineering / R & D

Publications

Summary Sheet
A Y	Research Publications - Journal		Research Publications - Conferences		Total
	National	International	National	International
2023-24	0	11	0	2	13
2022-23	0	14	0	16	30
2021-22	0	5	1	1	7
2020-21	0	23	1	0	24
2019-20	0	12	0	3	15
2018-19	1	8	2	13	24
2017-18	0	7	1	2	10
Grand Total:					123





DEPARTMENT OF MECHANICAL ENGINEERING
S. No	Name of the Faculty as Author	Total Authors in the order of appearance	Main Author / Other	Title of the Paper	Name of the Journal	ISBN / ISSN No	Vol / Month & Yr.	Indexing No. UGC / Scopus	URL / DOI
2023-24
National Journal Publications
nil
International Journal Publications
1	V  Sumanraju	Author 1		Constant Steam Inlet Conditions and their Impact on the Thermal Efficiency of a Cogeneration Power Plant	International Journal of Heat and Technology	-	Vol. 41, No. 4, August, 2023, pp. 847-853	Scopus	https://doi.org/10.18280/ijht.410407
	Dr. T. Ramamohan Rao	Author 2
	Narasimhulu Sanke	Author 3
2	K. Santhosh Kumar	Author 1		Harmonizing Muffler Design: The Virtuoso Performance based on Inlet Diameter, Outlet Diameter and Material in Orchestrating Transmission Loss	Journal of Propulsion Technology	1001-4055	Vol. 44 No. 4 (2023)	-	-
	Dr. K. Kishore	Author 2
	Dr. P. Ushasri	Author 3
3	Yamala Muralikrishna	Author 1		Parametric and comparative studies on fluid flow and heat transfer from uniformily and non uniformily heated plates	SPRINGER NATURE International Journals : Journal of Thermal Analysis and Calorimetry [JTAC]	-	07.12.2023	SCOPUS, SCI and SCIE	https://doi.org/10.1007/s10973-023-12730-z
	Dr. C. Gururaja Rao	Author 2
4	Dr. C. Gururaja Rao	Author 1		Interactive influence of conduction-convection-Radiation on heat transfer from a discretely anf non identically heated elrctronic gadget	SPRINGER NATURE International Journals :Journal of Engineering Thermophysics [JET]		Accepted on 26.10.2023	SCOPUS and SCIE
	K. Aditya	Author 2
5	V  Sumanraju	Author 1		Optimization of process parameters for enhancing overall efficiency: Experiment analysis and regression modeling	International Journal of Interactive Design and Manufacturing	-	13-Dec-23	Scopus	https://doi.org/10.1007/s12008-023-01626-9
	Dr. T. Ramamohan Rao	Author 2
	Narasimhulu Sanke	Author 3
6	Mukesh Kumar Tripati Dhanunjay Makteder DN Vasundhara Dr. Ch VKNSN Moorthy Preeti Patil Shivendra	Author 1 Author 2 Author 3 Author 4 Author 5 Author 6		Residual life assessment (RLA) analysis of apple disease based on multimodal deep learning model	International journal of intellegence systems and applications in engineering	21476799	Nov-23	scopus
7	Koteswara Rao B Kodanda Rama Rao Ch V Srinivas Dr. Ch VKNSN Moorthy Gandhi Pullajura	Author 1 Author 2 Author 3 Author 4 Author 5		PhysicoiChemical and tribological prpperties of commercial oil-bio-lubricant mixures dispersed with graphene nanoplatelets	RSC Advances
8	Myneni Madhubala D N Vasundhara Akkineni Haritha Dr. Ch VKNSN Moorthy	Author 1 Author 2 Author 3 Author 4		Design development and analysis of cognitive assisting aid with multisensor fused navigation for visually in paired people	Journal of big data
9	Markndeyulu Vuggirala N Alagappan Dr. Ch VKNSN Moorthy	Author 1 Author 2 Author 3		The role of nanofluids in the performance augmentation for the solar collectors used in solar water heating	International Journal of Ambient Energy			Scopus
10	K Pavan Kumar Y Suresh Pesn Krishna Prasad Dr. Ch VKNSN Moorthy A S Sai Prasad	Author 1 Author 2 Author 3 Author 4 Author 5		Image feature encoding using lownerization tensor	Journal of Theoritical and Applied Information Technology	1992-8645		Scopus
11	Harith A Madhu bala M B.Padmaja Dr. Ch VKNSN Moorthy Ravi Teja CMS	Author 1 Author 2 Author 3 Author 4 Author 5		Analysis of data privacy and anonymity aspects of contact tracing apps via smartphones - A use case of COVID -19	Journal of multimedia
12	D. Veerababu C. Sachin P. V. S. Subhashini B. Venkatesham	Author 1 Author 2 Author 3 Author 4		Acoustic Modeling and Analysis of Automotive Air- Filters	Article  in  The International Journal of Acoustics and Vibration		Vol. 28, No. 4, 2023 (pp. 353–361) Dec-2023	Scopus	10.20855/ijav.2023.28.41959
2022-23
National Journal Publications
nil
International Journal Publications
1	Dr. S. Venkataiah	Author 1	1	Investigation of intercooler fins of a two stage reciprocating air compressor	UPB Scientific Bulletin, Series D: Mechanical Engineering	1454-2358	Vol.84, Issue-4, 2022	Scopus	https://www.scientificbulletin.pub.ro/rev_docs_arhiva/rezdd1_896970.pdf
	G. Sthithapragna	Author 2
	N Nagaraju	Author 3
	K. Vivek yadav	Author 4
2	Guru Brahmam	Author 1		Study on added damping due to resistive shunting on cantilever, simply supported beam, and effect on the variation of amplitude at resonance.	Journal of Mechanical Engineering Science	-	-	Scopus	doi:10.1177/09544062221132186 02.11.2022
	Dr. T. Ramamohan Rao	Author 2
	M. Chanddra Sekhar Reddy	Author 3
3	Guru Brahmam	Author 1		Sensitive analysis on aided damping of shunted piezoceramic damping: Cantilever and simply supported beam	Journal of Vibroengineering	-	-	Scopus	Accepted on 08.12.2022
	Dr. T. Ramamohan Rao	Author 2
	M. Chanddra Sekhar Reddy	Author 3
4	Dr. S. Venkataiah	Author 1		Performance evaluation of vapour compression refrigeration system for a air conditioning applications using R-22 and R-410A as refrigerants various evoparating termperatures	International Journal for Research and Development in Technology	2349-3585	Vol. 18, issue 6, DEC-2022	Peer Reviewed
5	Dr. S. Venkataiah	Author 1		Performance evaluation of vapour compression refrigeration cycle for airconditioning applications with R-22, R-290 and R-600a as refrigerants	International Journal Research Publication and Reviews	2582-7421		Peer Reviewed
6	Dr. PV Rao	Author 1	1	Three dimensional studeis on flow distributions in savonious rotors	International Research Journal of Engineering and Technology	2395-0056 (e) 2395-0072(p)	Vol. 9, issue 11, Nov-2022	Peer Reviewed
7	Dr. PV Rao	Author 1	1	Numerical Investigations on Savonious Wind Rotors	International Journal for Research and Development in Technology	2349-3585	Vol. 18, issue 6, DEC-2022	Peer Reviewed
8	Dr. PV Rao	Author 1	1	Effect of environmental factors on the performance of savonious wind rotor	International Journal of Scientific Research and Engineering Trends	2395-566X	Vol. 8, issue 6, NOV-DEC-2022	Peer Reviewed
9	Dr. Ch.V.K.N.S.N. Moorthy	Author 4	Other	Numerical study Bio-Inspired Corrugated Airfoil Geometry in a Forward Flight at a Low Reynolds Numbers	WSEAS Transactions on Fluid Mechanics	2224-347X	Vol. 17, July 2022	Scopus	Doi:10.37394/232013.2022.17.12
10	Guru Brahmam	Author 1		Study on Prediction of Added Damping from Inclined PZT‑5 H for Bending and Torsional Modes	Iranian Journal of Science and Technology, Transactions of Mechanical Engineering			Scopus	Accepted on 03.03.2023
	Dr. T. Ramamohan Rao	Author 2
	M. Chanddra Sekhar Reddy	Author 3
11	Dr. K. Kishore	Author 1		A review on enhancement of developing noiceless suction muffler for reciprocating compressor	International Journal of Mechanical Engineering	2367-8968	Jun-23	Peer Reviewed
12	Dr. Ch.V.K.N.S.N. Moorthy A. Srivastav DN Vasundhara V Suryanarayana Reddy AS Sai Prasad	Author 1 Author 2 Author 3 Author 4 Author 5		Robotics process automation - The Ineluctable virtual workforce in various business sectors: Post covid-19 scenario	International Journal of Engineering Trends and Technology	2231-5381	Mar-23
13	S. Bhanutaja V Srinivas Dr. Ch.V.K.N.S.N. Moorthy J Sai Kumar B Laxmipathi Raju	Author 1 Author 2 Author 3 Author 4 Author 5		Prediction of thermophysical properties of hybrid nanofluids using machine learning algorithms	International Journal Interactive Design and Manufacturing		Apr-23
14	B Padmaja Dr. Ch VKNSN Moorthy N. Venkateswarulu Myneni Madhubala	Author 1 Author 2 Author 3 Author 4		Exploration of issues, challenges and latest developments in autonomous cars	Journal of big data			Scopus
2021-22
National Journal Publications
nil
International Journal Publications
1	Dr. K. Kishore	Author 1	1	Condition monitoring and flow control of cutting fluid using IoT for drilling operation	International Journal of Creating Research Toughts	2320-2882	Vol.9, Issue-10, Oct-2021	-	https://ijcrt.org/papers/IJCRT2110015.pdf
	H. Rohit	Author 2
2	Dr. P.V.S. Subhashini	Author 1	1	Parametric optimization of fused depositon modeling using multi objective techniques	Journal of Nano Technology and Smart materials		Vol.7, Issue-105, pp 1-12; Mar 2022	-	Parametric-Optimization-of-Fused-Deposition.pdf (jscholarpublishers.com)
	G. Sneha	Author 2
3	Jayanth Burri	Author 1	5	Desing and analysis of chasis for a FSAE Car	International Journal of Engineering Research Technology	2278-0181	Vol.10, Issue 11, pp 369-373   Nov-2021	-	DOI : 10.17577/IJERTV10IS110177
	Anirudh Kyatham	Author 2
	Sriram Kata	Author 3
	Koushik Alapati	Author 4
	Dr. P.V.S. Subhashini	Author 5
4	K. Anirudh,	Author 1	4	Design and Analysis of Suspension System For An FSAE Car	Turkish Online Journal of Qualitatuve Inquiry (TOJQI)		Volume 12, Issue 9, August 2021, Pages: 4693-4706	-	View of Design and Analysis of Suspension System for an FSAE car (tojqi.net)
	K. Sriram,	Author 2
	B. Jayanth	Author 3
	J. Anjaneyulu	Author 4
5	1. K. Anirudh,	Author 1	4	Design And Kinematic Analysis Of Suspension System For A Formula Society Of Automotive Engineers (FSAE) Car	Journal of Engineering Research and Reports	2582-2926	Article no.JERR.75066: 21(2), October 2021, pages: 48-63	-	DOI:10.9734/jerr/2021/v21i217445
	K. Sriram,	Author 2
	B. Jayanth	Author 3
	J. Anjaneyulu	Author 4
								-	-
2020-21
National Journal Publications
nil
International Journal Publications
1	Dr. S. Venkataiah	Author 1	1	performance evaluation of two stage cascade refrigeration system using natural refrigerants	International Journal Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / August-20.	Scopus	10.34218/IJARET.11.8.2020.64
2	K. Srinivasa Rao	Author 1	1	Design and analysis of piston made of magnesium silicon carbide (MGSIC)	International Journal Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / August-20.	Scopus	10.34218/IJARET.11.8.2020.027
	Sushmitha Podugu	Author 2
	Sri Sai Sathwika	Author 3
	Swapna Balgar	Author 4
3	Dr. P. V. Gopal Krishna	Author 1	1	Optimization of process parameter in submerged arc welding using cuckoo algorithm	International Journal Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / September-20.	scopus	https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3711914
	Dr. K. Kishore	Author 2
	G. Sravani	Author 3
4	Dr. P. V. Gopal Krishna	Author 1	1	Elastic buckling of aluminium (Al-2024-T3) plate with cut-out using numerical approach	Journal of Xi’an University of Architecture and Technology	1006-7930	12 /  Oct-2020.	scopus	https://www.xajzkjdx.cn/gallery/4-oct2020.pdf
	Dr. K. Kishore	Author 2
	Amith Yadav	Author 3
5	Dr. A. Srinivas	Author 1	1	Analysis of thermally stratified hot water storage tanks by energy principle	High Technology Letters	1006-6748	26 / October-20.	-	-
6	M.Venugopal Reddy*,                 P.Harshita, S.Sreshta	Author 1                  Author 2          Author 3	1	DESIGN AND ANALYSIS OF NON-PNEUMATIC HEXAGONAL TYRE	High Technology Letters	1006-6749	26 / October-20.	-	-
7	Suda Venkateswarulu	Author 1	1	DESIGN OF HVAC SYSTEM FOR OPERATION THEATRES USING HEAT RECOVERY WHEEL	High Technology Letters	1006-6749	26 / October-20.	-	-
8	Dr. K. Kishore	Author 1	1	Optimization of Process Parameters in Abrasive Water Jet Machining by Taguchi Method	High Technology Letters	1006-6749	26 / October-20.	-	-
	Dr. P. V. Gopal Krishna	Author 2
	K. Udaya Kumar	Author 3
	K, Suresh Naik	Author 4
	V. Mani Kumar	Author 5
9	N. Shivateja, P. Siva Raju, Y. Vijay Kumar, N B Sambamurthy*	Author 1                  Author 2          Author 3               Author 4	3	NUMERICAL ANALYSIS OF CONJUGATE NATURAL CONVECTION IN HORIZONTAL CYLINDRICAL ANNULI FILLED WITH AIR AND HELIUM GAS	High Technology Letters	1006-6749	26 / October-20.	-	-
10	Md. Luqhman,                G. Srikanth,                     P. Nandita	Author 1                  Author 2          Author 3	1	PERFORMANCE ANALYSIS ON USING ACETONE,  METHANOL AND GASOLINE FUEL BLENDS IN SPARK IGNITION ENGINE	High Technology Letters	1006-6749	26 / October-20.	-	-
11	VBS Rajendra Prasad    NAVEEN. M            PRANAY NEHANTH R     SHESHANK. C.	Author 1                  Author 2          Author 3               Author 4	1	OPTIMIZATION OF MACHINING PARAMETERS ON CNC TURN LATHE USING REGRESSION ANALYSIS	High Technology Letters	1006-6749	26 / October-20.	-	-
12	T. RamamohanRao            Nithin H.M                      C. J. Daniel                     Dulla Mayank	Author 1                  Author 2          Author 3               Author 4	1	DESIGN AND ANALYSIS OF AIRPLANE WING	High Technology Letters	1006-6749	26 / November-20.	-	-
13	T Krishnachaitanya*, Y. Shiva Kishore,             B. Srujan,                     V. Varun	Author 1                  Author 2          Author 3               Author 4	1	DESIGN AND ANALYSIS OF PUFFER ROBOT	High Technology Letters	1006-6749	26 / November-20.	-	-
14	K. Veladri                            Md. Dawood Ibrahim	Author 1                  Author 2	2	Design and Analysis of 3 - Axis Delta Type Parallel Robot	High Technology Letters	1006-6749	26 / October-20.	-	-
15	Dr. C. Gururaja Rao          K. Aditya, A. Jaswant and Ch. Bhanu Kiran	Author 1                  Author 2          Author 3               Author 4	1	INTERACTION BETWEEN CONDUCTION-CONVECTION- RADIATION FROM AN L-CORNER WITH DISCRETE AND NON-IDENTICAL HEATING	High Technology Letters	1006-6749	26 / October-20.	-	-
16	S.Sreekrishna	Author 1	1	DETERMINATION OF STRESS INTENSITY FACTOR FOR DIFFERENT CRACK SHAPES USING PLASTIC ZONE CONCEPT	High Technology Letters	1006-6749	26 / October-20.	-	-
17	P.Venkatswara Rao, H.H.D.S.S.Arun, Mohammed Khaja Akmal Pasha,                    Rudraraju Lokesh	Author 1                  Author 2          Author 3               Author 4	1	AERODYNAMIC ANALYSIS OF VERTICAL AXIS WIND TURBINE USING CFD	High Technology Letters	1006-6749	26 / October-20.	-	-
18	B. Sandeep, S. Bhanu Prasad, V. Rohith Kumar	Author 1                  Author 2          Author 3	1	EXPERIMENTAL INVESTIGATION OF (Al2O3 + SiC + Gr)  REINFORCED AL7075 HYBRID METAL MATRIX COMPOSITES	High Technology Letters	1006-6749	26 / October-20.	-	-
19	M. Sudhkar	Author 1	1	DEVELOPMENT OF MULTICRITERIA MODEL TO SELECT EFFICIENT RENEWABLE BASED DESALINATION TECHNOLOGY AT REMOTE AREAS IN ANDHRA PRADESH – INDIA	International Journal of Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / September-20.	scopus	-
20	K. Kishore P.V. Gopal krishna    E. Karunakar	Author 1                  Author 2          Author 3	1	Optimization of Mechanical Properties of AISI 1040 Steel in Submerged Arc Welding Process	Journal of Xi'an University of Architecture & Technology	ISSN No : 1006-7930	Volume XII, Issue X, 2020	-	DOI: 10.34218/IJARET.11.9.2020.097
21	Dr. JALLEDA ANJANEYULU1, V. HARSHA VARDHAN2 & P.CHANDRA KUMAR3	Author 1                  Author 2          Author 3	1	EVALUATION OF MECHANICAL BEHAVIOUR OF GLASS FIBRE-EPOXY WITH GRAPHENE NANO POWDER LAMINATES	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)	ISSN No. : 2249 - 6890	Vol. 10, Issue-3         June 2020	Scopus
22	M. Prabhukiran                K. Kishore P.V. Gopal krishna    G. Ramadevudu	Author 1                  Author 2          Author 3               Author 4	2	Productivity enhancement of Twist Drill Bit by Molybdenum Trioxide (MoO3) Nano-Coatings and Cry-Treatment	Solid State Technology		Volume 63, Issue 2s, 2020	Scopus	-
23	V.B.S. Rajendra Prasad                         Neha P	Author 1                  Author 2	1	Investigation on sandwiched beams with EPDM rubber core for tensile and compressive behavior	Pensee	0031-4773	Volume 51, issue 3, 2021	Scopus	-
2019-20
National Journal Publications
nil
International Journal Publications
1	Dr. C. Gururaja Rao	Author 1	1	Fluid Flow and Heat Transfer Studies on a Discretely and Non-Identically Heated Electronic Board	Journal of Engineering Thermophysics	1810-2328	29 / March-20.	Scopus	[DOI: 10.1134/S1810232820010075]
	Murali Yamala	Author 2
2	Dr. C. Gururaja Rao	Author 1	1	Buoyancy-Aided Conjugate Mixed Convection with Surface Radiation from a Vertical Channel with Multiple Non-Identical Discrete Heat Sources	International Journal for Computational Methods in Engineering Science and Mechanics	1024-123X  1563-5147	21 / March-20.	Scopus	[DOI: 10.1080/15502287.2020.1718799]
	Abhijeet. P. Shah	Author 2
3	V.B.S. Rajendra Prasad	Author 1	1	Identification of Damping Characteristics of EPDM-RUBBER with applications to sandwiched beams and considerations to Engine Mounts for Performance Evaluation	Elsevier Materials Today Proceedings	2214-7853	Jun-20	Scopus	https://doi.org/10.1016/j.matpr.2020.04.317
4	Dr. J. Anjaneyulu	Author 1	1	Evaluation of mechanical behaviour of glass fibre-epoxy with graphene nano powder laminates	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)	2249–6890	10 / June-20.	Scopus	10.24247/IJMPRD/JUNE-2020/299
	V. Harsha Vardhan	Author 2
	P. Chandra Kumar	Author 3
5	Dr. J. Anjaneyulu	Author 1	1	Design and analysis of a composite T-joint used in automobile chassis	International Journal of Scientific & Engineering Research	2229-5518	11 / April-20.	UGC	IJSER.ORG/RESEARCH PAPER/APRIL-2020
	Niharika Kaza	Author 2
	Prajwala Gavuji	Author 3
6	Prabhu Kiran Martha	Author 1	2	Lifetime and performance improvement of HSS drill bit by titania (TiO2) Nano-coatings and cryogenic treatment	International Journal of Engineering and Advanced Technology	2249-8958	8 / August-19.	Scopus	10.35940/ijeat.F8100.088619
	K. Kishore	Author 2
	G. Ramadevudu	Author 3
7	P. Venkateswara Rao	Author 1	2	Performance study of twisted vaned diffuser in compressor stage	Advances in engineering design and simulation	978-981-13-8467-7	Oct-19	UGC	https://doi.org/10.1007/978-981-13-8468-4_8
	G.V. Ramana Murty	Author 2
	B. Amog	Author 3
	C. Pradeep Reddy	Author 4
8	Ch. Shekar	Author 1	2	Machining of inconel 718 by EDM using taguchi method for optimization of material removal rate and surface roughness	Internal Journal for Research in Applied Science and Engineering Technology	2321-9653	7 / October-19.		10.1016/j.matpr.2020.01.372
	Dr. K. Kishore	Author 2
	P. Laxmi Narayana	Author 3
9	K. Manish Kumar	Author 1	2	Study Of Metallurgical and Mechanical Properties In Submerged Arc Welding With Different Composition Of Fluxes-A Review	Elsevier Materials Today Proceedings		22 / July-19.	Scopus	https://doi.org/10.1016/j.matpr.2020.03.351
	Dr.P.V.Gopalkrishna	Author 2
	Dr. K. Kishore	Author 3
10	Dr. J Anjaneyulu	Author 1	2	Evaluation of mechanical behavior of glass fibre-epoxy composite laminates	Elsevier Materials Today Proceedings		22 / July-19.	Scopus	https://doi.org/10.1016/j.matpr.2020.03.423
	Md Moizuddin	Author 2
	P. Chandra Kumar	Author 3
11	Manojkumar Gudala	Author 1	6	Hydrodynamics and energy analysis of heavy crude oil transportation through horizontal pipelines using novel surfactant	Petroleum Science and Technology	0920-4105	178 / July-2019.	Scopus	https://doi.org/10.1016/j.petrol.2019.03.027
	Shirsendu Banerjee	Author 2
	Tarun Kumar Naiya	Author 3
	Ajay Mandal	Author 4
	Subbaiah T	Author 5
	Dr. T. Ramamohan Rao	Author 6
12	R. Naresh	Author 1	2	Static and Trasient response of a leaf spring with EPDM rubber sanwitched between steel leaves	Elsevier Materials Today Proceedings		22 / July-19.	Scopus
	V.B.S. Rajendra Prasad	Author 2
	G.Venkata Rao	Author 3
2018-19
National Journal Publications
1	Mithil Badam	Author 1	2	CNC plotter developed for plethora machining purposes	Journal of Innovations in Mechanical Engineering	2581-7019	2 / January-19.		http://www.indianjournals.com/ijor.aspx?target=ijor:ijme1&volume=2&issue=1&article=009
	Dr. P.V.S. Subhashini	Author 2
International Journal Publications
1	Dr. P. Venkateswara Rao	Author 1	1	Effect of chord length of a low solidity vaned diffuser on the performance of a centrifugal compressor stage	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/10.pdg
	Dr. G.V. Ramana Murty	Author 2
	B. Amogh – student	Author 3
	C. Pradeep Reddy	Author 4
2	Dr. P.V. Gopal Krishna	Author 1	1	Comparative performance evaluation of stepped and stepless drive in turning	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/06.pdf
	Dr. K. Kishore	Author 2
	K. Srinivasa Rao	Author 3
3	Dr. J. Anjaneyulu	Author 1	1	Design and analysis of automatic lifting and placing machine	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/101.pdf
	K. Srinivasa Rao	Author 2
	K. Jeevan Reddy	Author 3
4	Dr. P.V. Gopal Krishna	Author 1	1	No fault  forward of range counter shaft sub assembly	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/10.pdf
	S. Sowmya	Author 2
5	V. Pavan Kumar Chary	Author 1	2	Design and analysis of piston using metal matrix composite (AlSiC)	International Journal of Research	2236-6124	May-19		http://www.iaeme.com/MasterAdmin/Journal_uploads/IJARET/VOLUME_11_ISSUE_8/IJARET_11_08_027.pdf
	K. Srinivasa Rao	Author 2
6	Dr. P.V.S. Subhashini	Author 1	1	Motion analysis of a two link manipulator used in FDM	International Journal of Research	2232-6124	8	UGC
	P. Venkata Raju	Author 2
	T. Krishna Chaitanya	Author 3
7	M. Sudhakar	Author 1	1	Selection of an efficient desalination technology to treat brackish water for domestic application in metropolitan cities in India using multi-criteria analysis	International Journal of Industrial Engineering and Technology		9 / June-19.	UGC	10.24247/ijietjun20194
8	C P Hemanth Vema Reddy	Author 1	2	An experimental study of friction stir welding and dissimilar aluminum alloys	International Journal of Research	2236-6124	8 / June-19.	UGC	http://ijrpublisher.com/gallery/8-june-2019.pdf
	B. Sandeep	Author 2
	K. Kishore	Author 3
2017-18
National Journal Publications
nil
International Journal Publications
1	Dr. PV Gopal Krishna	Author 1	1	Design and analysis of Carbon Fiber Reinforced Composite Shell Structure using Classical Laminate Plate theory	British Journal of Applied Science  and Technology	-	20 / October/2017.	UGC	https://doi.org/10.9734/BJAST/2017/31981
	Ms. Podila Meghana	Author 2
	Mr. A.Sai Kumar	Author 3
	Dr.K.Kishore	Author 4
2	Mr. G. Manoj Kumar	Author 1	3	Studies on the effect of bio additive on viscosity and energy requirement for heavy crude oil flow	International Journal of Petroleum Science and Technology in Mechanical Engineering	0920-4105	Dec-17	scopus	10.1080/10916466.2017.1405030
	Mr. S. Banerjee	Author 2
	Dr. T. Ram Mohan Rao	Author 3
	Mr. N. Tarun	Author 4
	Mr. M. Ajay	Author 5
3	Manojkumar Gudala	Author 1	4	Rheological modeling and drag reduction studies of Indian heavy crude oil in presence of novel surfactant	Petroleum Science and Technology	1091-6466	35 / Nov-2017.	Scopus	https://doi.org/10.1080/10916466.2017.1402034
	Shirsendu Banerjee	Author 2
	Amit Kumar	Author 3
	Dr. T. Rama Mohan Rao	Author 4
	Ajay Mandal	Author 5
	Tarun Kumar Naiya	Author 6
4	Manojkumar Gudala	Author 1	3	The effect of a bio additive on the viscosity and the energy requirement on heavy crude oil flow	Petroleum Science and Technology	1091-6466	Dec-17	Scopus	10.1080/10916466.2017.1405030
	Shirsendu Banerjee	Author 2
	Dr. T. Rama Mohan Rao	Author 3
	Tarun Kumar Naiya	Author 4
	Ajay Mandal	Author 5
5	Mr. J. Anjaneyulu	Author 1	1	Design and dimensional analysis of Mechanisms	SSRG International journal of Mechanical Engineering(SSRG-IJME)	2348 – 8360	May 2017.	UGC	http://www.internationaljournalssrg.org/uploads/specialissuepdf/NCRAME/2017/ME/IJME-NCRAME-P113.pdf
	Ms. Ashwini.V	Author 2
6	Dr. T. Ramamohan Rao	Author 1	1	Multi Objective Optimization of Turning Parameters for A1 6061 Using Genetic Algorithm	Journal of Metallurgy and Materials Science,1.07.2015		July-2017.	ugc	http://www.indianjournals.com/ijor.aspx?target=ijor:jmms&volume=57&issue=4&article=006
7	Manoj Kumar Gudala	Author 1	4	Experimental investigation on hydrodynamics of Two-phase crude oil flow in horizontal pipe with novel surfactant	Journal of Fluids Engineering	061302-1	140 / June 2018.	Scopus	https://doi.org/10.1115/1.4039130
	Shirsendu Banerjee	Author 2
	Ravindra Kumar	Author 3
	Dr. T. Rama Mohan Rao	Author 4
	Ajay Mandal	Author 5
	Tarun Kumar Naiya	Author 6





DEPARTMENT OF MECHANICAL ENGINEERING
S. No	Name of the Faculty as Author	No. of Authors	Main Author / Other	Title of the Paper	Name of the Conference	Conference - Date, Month and Year	Organised by with location	ISBN / ISSN No	URL / DOI
2023-24
International Conference Publications
1	G. Sree Lakshmi, Dr. T. Ramamohan Rao, K. Gurubrahman	Author 1                  Author 2          Author 3	1	Investigation on the Strategic Locations of Piezo for Maximum Voltage Generation in Electric Vehicle	International Conference on Ambient Intelligence Knowledge Informatics and Industrial Electronics (AIKIIE-2023)	2-3 November 2023	Rao Bahadur Y. Mahabaleshwarappa Engineering College, Ballari,Karnataka	-	-
2	Sardar Jaspal Singh Dr. K. Kishotre Dr. P. Laxminaraya Dr. A. Parasuramulu	Author 1                  Author 2          Author 3 Author 4	1	Investigation of micro structural and mechanical properties of friction surfacing on low carbon steel using stainless steel grades	International Conference and exposition on mechanical, material and manufacturing technology	October 28-29, 2022	CVR College of Engineerng, Hyderabad	-	https://doi.org/10.1016/j.matpr.2023.04.540
2022-23
International Conference Publications
1	V. Avaneesh Athreya, P. Venkateswara Rao, G.V. Ramana Murty	Author 1                  Author 2          Author 3	1	Numerical Studies on the Effect of the Lean Angle on a Vaned Diffuser in a Centrifugal Compressor Stage	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
2	K.Veladri, Dr. G. Chandra Mohan Reddy, Dr. P. Ramesh Babu	Author 1                  Author 2          Author 3	1	Hyper- Redundant Snake Robot Design and Modeling	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
3	B. V.S. Manish Gupta, M. Hrushikesh, S. Kirthana	Author 1                  Author 2          Author 3	1	Design of Prolate Ellipsoidal Dome for Underwater Missile Applications	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
4	D. Govinda Rao, K. I. Spurgeon, B. Naga Manohar	Author 1                  Author 2          Author 3	1	Design and Analysis of Milling Cutter Tool	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
5	V.B.S.Rajendra Prasad, A. Durgavani	Author 1                  Author 2          Author 3	1	Non-linear Hyper Elastic Behaviour of Air Springs	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
6	K. I. Spurgeon, D. Govinda Rao, B. N. Manohar, Sasanka Neti	Author 1                  Author 2          Author 3 Author 4	1	Allocation of Capacities to Optimize the Production of Vaccines	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
7	Dr. J. Anjaneyulu, Durgam Karna, K. Srinivasa Rao	Author 1                  Author 2          Author 3	1	Design, Analysis, and Fabrication of Composite Mono-Leaf Spring	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
8	P. V. Gopala Krishna, P. Abhinav, P. Chandra Kumar, K. Kishore	Author 1                  Author 2          Author 3 Author 4	1	Investigating the Mechanical Properties of Graphene Based Nano-composites	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
9	Dr. J. Anjaneyulu, K. Veladri, Mohd. Shariuddin	Author 1                  Author 2          Author 3	1	Kinematic & Dynamic Analysis of 3 Link Robot Manipulator	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
10	K. Gurubrahmam, Ch. Prabhakar Rao, T. Rammohan Rao, M. Chandra Sekhar Reddy	Author 1                  Author 2          Author 3 Author 4	1	Modal Analysis of Cancer Cell	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
11	M. Pandarinath, Dr. T. Ramamohan Rao, Dr. Sriram Venkatesh	Author 1                  Author 2          Author 3	1	Statistical Analysis of Musculoskeletal Disorders (MSD) and Work Related Risk Factors of Public Transport Drivers	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
12	PVS Subhashini, A. Sumith Chandra, C. Vijay Dev Reddy	Author 1                  Author 2          Author 3	1	Design and Structural Analysis of 4-DOF Manipulator	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
13	Dr. S. Venkataiah, Shaik Uzeif, Sayeed Khan, Saifullah Khalid	Author 1                  Author 2          Author 3 Author 4	1	Performance Evaluation of a Two Stage Cascade Refrigeration Cycle Using R410A and R507a in HT Cycle with R744 in LT Cycle	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
14	Md Feroz M. Venugopal Reddy	Author 1                  Author 2          Author 3	1	Design and Vibration Analysis of Two Wheelers Helical Spring Shock Absorbers	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
15	Dr. S. Venkataiah G. Sthithapragna (Alumni)	Author 1                  Author 2	1	Comprehensive evaluation of nano refrigerants: A review	2nd International Conference and Exposition on Advances in Mechanical Engineering	28-29 June 2022	Collage of Engineering, Pune		Materials today proceedings
16	Dr. S. Venkataiah Irukula Abnhinav Koyyada Akhil (Alumni)	Author 1                  Author 2          Author 3	1	Design, modeling, analysis and fabrication of swiveling conveyor	2nd International Conference and Exposition on Advances in Mechanical Engineering	28-29 June 2022	Collage of Engineering, Pune		Materials today proceedings
17	Sardar Jaspal Singh Dr. K. Kishore P. Laxminarayana A. Parshuramulu	Author 1                  Author 2          Author 3 Author 4	2	Investigation of micro structural and mechanical properties of friction surface on low carbon steel by using stainless steel  grades	Materials Today Proceedings				Materials today proceedings
2021-22
National Conference Publications
1	Dr. P.V.S. Subhashini	Author 1	1	Optimization of parameters  for deburring operation with SCARA	3rd National E-Conference on Emerging Trends in Mechanical Engineering (ETIME 2021)	28-29 Sept 2021	SNIST, Hyderabad	978-0-13-601970-1
2	Dr. P.V.S. Subhashini	Author 1	1	Mathematical derivation and validation of kinematics for 4-DOF manipulator	4th International Conference on Advances in Mechanical Engineering (ICAME 2022)	24-26 March 2022	SRM Institute of Science and Technology, SRM Nagar, Kattankulathur, Chengalpattu, TN-603203
2020-21
National Conference Publications
1	B. Sandeep                          V. Pramod Abu Sufyan Malik       Aravind Reddy	Author 1                  Author 2          Author 3               Author 4	1	Experimental and microstructural investigation of different welding processes on dissimilar metals	National Conference on Advances in Mechanical Engineering	27-28 May 2021	SVNIT, Surat	978-93-5473-914-9
International Conference Publications
nil
2019-20
National Conference Publications
nil
International Conference Publications
1	Dr. P. Venkateswara Rao	Author 1	1	CFD studies on a centrifugal compressor stage with twisted vanes of a low solidity diffuser.	International Conference on “Advances in Material Science and Mechanical Engineering” (ICAMSME-2020)	7-9 February 2020	N.B.K.R. Institute of Science & Technology, Vidyanagar-524413, SPSR Nellore Dist.	-
2	Ch. Shekar	Author 1	2	Material removal rate and surface roughness on machining of inconel 718 by electrical discharge machine using taguchi technique	Internal conference on Advanced Light-weight Materials and  Structures (ICALMS-2k20)	Oct-19			https://doi.org/10.1016/j.matpr.2020.01.372
	Dr. K. Kishore	Author 2
	P. Laxmi Narayana	Author 3
3	Ch. Shekar	Author 1	3	Optimization of process parameters on EDM for inconel 718	International conference on ICIME 2019	/ 2019.
	U. Ashok Kumar	Author 2
	Dr. K. Kishore	Author 3
	P. Laxmi Narayana	Author 4
2018-19
National Conference Publications
1	Dr. J. Anjaneyulu	Author 1	1	Kinematic analysis of PUMA 762 manipulator	3rd national conference on Advances in Engineering, Technology and Sciences – NCAETS 2019	04.04.2019	Spoorthy Engineering College, Nadargul, Hyderabad		-
2	K.Veladri Dr.P.V.Gopalkrishna	Author-1 author-2	1	Recycling of iron and steel making by products: A review	5th National Conference on Apllied Physiscs and Material Science	7-8 the Sept 2018	Dept of Physics, VCE,Hyd
International Conference Publications
1	S.Kirthana	Author 1	1	Static structural analysis on femur bone using different plate materials	International Conference on Materials, Manufacturing and Modelling (ICMMM)	29-31 Mar 2019	VIT, Vellore		https://doi.org/10.1016/j.matpr.2020.03.354
2	S.Kirthana	Author 1	1	A FEA on  assemble fractured human femur bone with and without HA coated prosthetic plate material	International Conference on Materials, Manufacturing and Modelling (ICMMM)	29-31 Mar 2019	VIT, Vellore		https://doi.org/10.1016/j.matpr.2020.03.422
3	V.B.S. Rajendra Prasad	Author 1	1	Static and transient response of leaf  spring with EPDM rubber sandwiched between steel leaves	International Conference on Materials, Manufacturing and Modelling (ICMMM)	29-31 Mar 2019	VIT, Vellore		https://doi.org/10.1016/j.matpr.2020.03.286
	R. Naresh	Author 2
	Dr. G. Venkata Rao	Author 3
4	V.B.S. Rajendra Prasad	Author 1	1	Static and fatigue  analysis of  leaf spring with  rubber sandwiched steel layer	International Conference UICETE	29-31 Mar 2019	OU, Hyderabad		https://doi.org/10.1016/j.matpr.2020.03.286
5	Mrs. S. Kirthana	Author 1	1	Reconstruction of femur bone from DICOM files and FEA on fractured muman femur bone with PEEK thermoplastic prosthetic plate implantation	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India		10.1007/978-981-13-8468-4_10
6	G. Pradeep Kumar	Author 1	2	Convergent modeling and FE based structural analysis of patient specific cranial implant in supine sleeping position	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Dr. T. Ramamohan Rao	Author 2
7	B Shreya – BE student	Author 1	3	FDM and 3D modeling of patient specific cranial implant from DICOM images and finite element analysis of various infilled patterns	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	G. Pradeep Kumar – PG	Author 2
	Dr. T. Ramamohan Rao	Author 3
8	Dr. P. Venkateswara Rao	Author 1	3	Performance study of twisted vaned diffuser in a compressor stage	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Dr. G.V. Ramana Murty	Author 2
	B. Amogh	Author 3
	C. Pradeep Reddy	Author 4
	J. Karthik Reddy	Author 5
9	V.B.S. Rajendra Prasad	Author 1	1	Dynamic response of rubber based sandwiched beams for impact loading	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Md. Idrees	Author 2
10	Dr. P.V.S. Subhashini	Author 1	1	Parametric optimization of fused deposition modeling using multi objective techniques	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Ms. G. Sneha	Author 2
	Mrs. Ch. Amareswari	Author 3
11	Dr. P.V.S. Subhashini	Author 1	1	Modeling of two link manipulator used for 3D printing	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Prof. B. Anjaneya Prasad	Author 2
	Mrs. Navaneetha Kasa	Author 3
12	V.B.S. Rajendra Prasad	Author 1	1	Identification                  of damping characteristics of EPDM and application of engine mounts for performance evaluation	International Conference on Advances in Materials and Manufacturing Applications-IConAMMA-2018	17-18 August 2018	Amrita Vishwa Vidyapeetham, Bengaluru
13	Md Idrees	Author 1	2	Response of Rubber based Engine Mounts with SBR as Core rubber	IOP Conference Material Science and Engineering				10.1088/1757-899x/455/1/012108
	V.B.S. Rajendra Prasad	Author 2
2017-18
National Conference Publications
1	Dr. S. Venkataiah	Author 1	1	Thermodynamics analysis of two stage cascade refrigeration system using natural refrigerants	National Conference on Advances in Mechanical Engineering & Nano Technology (AMENT 2018)	29-30 June 2018	UCE (A), OU, Hyderabad
International Conference Publications
1	Dr. P.V.S. Subhashini	Author 1	1	A review on fused deposition modeling	1st International Conference on Innovations in Mechanical Engineering (ICIME-2018)	5-6 January 2018	Gurunanak Institution of Technology
	G. Sneha	Author 2
2	S. Kirthana	Author 1	1	Finite element analysis and  topology optimization of engine mounting bracket	ICMPC-2018	16-18 March 2018	Gokaraju Rangaraju Institute of Engineering & Technology
	Mohammed Khaja Nizamuddin	Author 2

 

DEPARTMENT OF MECHANICAL ENGINEERING
S. No	Name of the Faculty as Author	Total Authors in the order of appearance	Main Author / Other	Title of the Paper	Name of the Journal	ISBN / ISSN No	Vol / Month & Yr.	Indexing No. UGC / Scopus	URL / DOI
2023-24
National Journal Publications
nil
International Journal Publications
1	V  Sumanraju	Author 1		Constant Steam Inlet Conditions and their Impact on the Thermal Efficiency of a Cogeneration Power Plant	International Journal of Heat and Technology	-	Vol. 41, No. 4, August, 2023, pp. 847-853	Scopus	https://doi.org/10.18280/ijht.410407
	Dr. T. Ramamohan Rao	Author 2
	Narasimhulu Sanke	Author 3
2	K. Santhosh Kumar	Author 1		Harmonizing Muffler Design: The Virtuoso Performance based on Inlet Diameter, Outlet Diameter and Material in Orchestrating Transmission Loss	Journal of Propulsion Technology	1001-4055	Vol. 44 No. 4 (2023)	-	-
	Dr. K. Kishore	Author 2
	Dr. P. Ushasri	Author 3
3	Yamala Muralikrishna	Author 1		Parametric and comparative studies on fluid flow and heat transfer from uniformily and non uniformily heated plates	SPRINGER NATURE International Journals : Journal of Thermal Analysis and Calorimetry [JTAC]	-	07.12.2023	SCOPUS, SCI and SCIE	https://doi.org/10.1007/s10973-023-12730-z
	Dr. C. Gururaja Rao	Author 2
4	Dr. C. Gururaja Rao	Author 1		Interactive influence of conduction-convection-Radiation on heat transfer from a discretely anf non identically heated elrctronic gadget	SPRINGER NATURE International Journals :Journal of Engineering Thermophysics [JET]		Accepted on 26.10.2023	SCOPUS and SCIE
	K. Aditya	Author 2
5	V  Sumanraju	Author 1		Optimization of process parameters for enhancing overall efficiency: Experiment analysis and regression modeling	International Journal of Interactive Design and Manufacturing	-	13-Dec-23	Scopus	https://doi.org/10.1007/s12008-023-01626-9
	Dr. T. Ramamohan Rao	Author 2
	Narasimhulu Sanke	Author 3
6	Mukesh Kumar Tripati Dhanunjay Makteder DN Vasundhara Dr. Ch VKNSN Moorthy Preeti Patil Shivendra	Author 1 Author 2 Author 3 Author 4 Author 5 Author 6		Residual life assessment (RLA) analysis of apple disease based on multimodal deep learning model	International journal of intellegence systems and applications in engineering	21476799	Nov-23	scopus
7	Koteswara Rao B Kodanda Rama Rao Ch V Srinivas Dr. Ch VKNSN Moorthy Gandhi Pullajura	Author 1 Author 2 Author 3 Author 4 Author 5		PhysicoiChemical and tribological prpperties of commercial oil-bio-lubricant mixures dispersed with graphene nanoplatelets	RSC Advances
8	Myneni Madhubala D N Vasundhara Akkineni Haritha Dr. Ch VKNSN Moorthy	Author 1 Author 2 Author 3 Author 4		Design development and analysis of cognitive assisting aid with multisensor fused navigation for visually in paired people	Journal of big data
9	Markndeyulu Vuggirala N Alagappan Dr. Ch VKNSN Moorthy	Author 1 Author 2 Author 3		The role of nanofluids in the performance augmentation for the solar collectors used in solar water heating	International Journal of Ambient Energy			Scopus
10	K Pavan Kumar Y Suresh Pesn Krishna Prasad Dr. Ch VKNSN Moorthy A S Sai Prasad	Author 1 Author 2 Author 3 Author 4 Author 5		Image feature encoding using lownerization tensor	Journal of Theoritical and Applied Information Technology	1992-8645		Scopus
11	Harith A Madhu bala M B.Padmaja Dr. Ch VKNSN Moorthy Ravi Teja CMS	Author 1 Author 2 Author 3 Author 4 Author 5		Analysis of data privacy and anonymity aspects of contact tracing apps via smartphones - A use case of COVID -19	Journal of multimedia
12	D. Veerababu C. Sachin P. V. S. Subhashini B. Venkatesham	Author 1 Author 2 Author 3 Author 4		Acoustic Modeling and Analysis of Automotive Air- Filters	Article  in  The International Journal of Acoustics and Vibration		Vol. 28, No. 4, 2023 (pp. 353–361) Dec-2023	Scopus	10.20855/ijav.2023.28.41959
2022-23
National Journal Publications
nil
International Journal Publications
1	Dr. S. Venkataiah	Author 1	1	Investigation of intercooler fins of a two stage reciprocating air compressor	UPB Scientific Bulletin, Series D: Mechanical Engineering	1454-2358	Vol.84, Issue-4, 2022	Scopus	https://www.scientificbulletin.pub.ro/rev_docs_arhiva/rezdd1_896970.pdf
	G. Sthithapragna	Author 2
	N Nagaraju	Author 3
	K. Vivek yadav	Author 4
2	Guru Brahmam	Author 1		Study on added damping due to resistive shunting on cantilever, simply supported beam, and effect on the variation of amplitude at resonance.	Journal of Mechanical Engineering Science	-	-	Scopus	doi:10.1177/09544062221132186 02.11.2022
	Dr. T. Ramamohan Rao	Author 2
	M. Chanddra Sekhar Reddy	Author 3
3	Guru Brahmam	Author 1		Sensitive analysis on aided damping of shunted piezoceramic damping: Cantilever and simply supported beam	Journal of Vibroengineering	-	-	Scopus	Accepted on 08.12.2022
	Dr. T. Ramamohan Rao	Author 2
	M. Chanddra Sekhar Reddy	Author 3
4	Dr. S. Venkataiah	Author 1		Performance evaluation of vapour compression refrigeration system for a air conditioning applications using R-22 and R-410A as refrigerants various evoparating termperatures	International Journal for Research and Development in Technology	2349-3585	Vol. 18, issue 6, DEC-2022	Peer Reviewed
5	Dr. S. Venkataiah	Author 1		Performance evaluation of vapour compression refrigeration cycle for airconditioning applications with R-22, R-290 and R-600a as refrigerants	International Journal Research Publication and Reviews	2582-7421		Peer Reviewed
6	Dr. PV Rao	Author 1	1	Three dimensional studeis on flow distributions in savonious rotors	International Research Journal of Engineering and Technology	2395-0056 (e) 2395-0072(p)	Vol. 9, issue 11, Nov-2022	Peer Reviewed
7	Dr. PV Rao	Author 1	1	Numerical Investigations on Savonious Wind Rotors	International Journal for Research and Development in Technology	2349-3585	Vol. 18, issue 6, DEC-2022	Peer Reviewed
8	Dr. PV Rao	Author 1	1	Effect of environmental factors on the performance of savonious wind rotor	International Journal of Scientific Research and Engineering Trends	2395-566X	Vol. 8, issue 6, NOV-DEC-2022	Peer Reviewed
9	Dr. Ch.V.K.N.S.N. Moorthy	Author 4	Other	Numerical study Bio-Inspired Corrugated Airfoil Geometry in a Forward Flight at a Low Reynolds Numbers	WSEAS Transactions on Fluid Mechanics	2224-347X	Vol. 17, July 2022	Scopus	Doi:10.37394/232013.2022.17.12
10	Guru Brahmam	Author 1		Study on Prediction of Added Damping from Inclined PZT‑5 H for Bending and Torsional Modes	Iranian Journal of Science and Technology, Transactions of Mechanical Engineering			Scopus	Accepted on 03.03.2023
	Dr. T. Ramamohan Rao	Author 2
	M. Chanddra Sekhar Reddy	Author 3
11	Dr. K. Kishore	Author 1		A review on enhancement of developing noiceless suction muffler for reciprocating compressor	International Journal of Mechanical Engineering	2367-8968	Jun-23	Peer Reviewed
12	Dr. Ch.V.K.N.S.N. Moorthy A. Srivastav DN Vasundhara V Suryanarayana Reddy AS Sai Prasad	Author 1 Author 2 Author 3 Author 4 Author 5		Robotics process automation - The Ineluctable virtual workforce in various business sectors: Post covid-19 scenario	International Journal of Engineering Trends and Technology	2231-5381	Mar-23
13	S. Bhanutaja V Srinivas Dr. Ch.V.K.N.S.N. Moorthy J Sai Kumar B Laxmipathi Raju	Author 1 Author 2 Author 3 Author 4 Author 5		Prediction of thermophysical properties of hybrid nanofluids using machine learning algorithms	International Journal Interactive Design and Manufacturing		Apr-23
14	B Padmaja Dr. Ch VKNSN Moorthy N. Venkateswarulu Myneni Madhubala	Author 1 Author 2 Author 3 Author 4		Exploration of issues, challenges and latest developments in autonomous cars	Journal of big data			Scopus
2021-22
National Journal Publications
nil
International Journal Publications
1	Dr. K. Kishore	Author 1	1	Condition monitoring and flow control of cutting fluid using IoT for drilling operation	International Journal of Creating Research Toughts	2320-2882	Vol.9, Issue-10, Oct-2021	-	https://ijcrt.org/papers/IJCRT2110015.pdf
	H. Rohit	Author 2
2	Dr. P.V.S. Subhashini	Author 1	1	Parametric optimization of fused depositon modeling using multi objective techniques	Journal of Nano Technology and Smart materials		Vol.7, Issue-105, pp 1-12; Mar 2022	-	Parametric-Optimization-of-Fused-Deposition.pdf (jscholarpublishers.com)
	G. Sneha	Author 2
3	Jayanth Burri	Author 1	5	Desing and analysis of chasis for a FSAE Car	International Journal of Engineering Research Technology	2278-0181	Vol.10, Issue 11, pp 369-373   Nov-2021	-	DOI : 10.17577/IJERTV10IS110177
	Anirudh Kyatham	Author 2
	Sriram Kata	Author 3
	Koushik Alapati	Author 4
	Dr. P.V.S. Subhashini	Author 5
4	K. Anirudh,	Author 1	4	Design and Analysis of Suspension System For An FSAE Car	Turkish Online Journal of Qualitatuve Inquiry (TOJQI)		Volume 12, Issue 9, August 2021, Pages: 4693-4706	-	View of Design and Analysis of Suspension System for an FSAE car (tojqi.net)
	K. Sriram,	Author 2
	B. Jayanth	Author 3
	J. Anjaneyulu	Author 4
5	1. K. Anirudh,	Author 1	4	Design And Kinematic Analysis Of Suspension System For A Formula Society Of Automotive Engineers (FSAE) Car	Journal of Engineering Research and Reports	2582-2926	Article no.JERR.75066: 21(2), October 2021, pages: 48-63	-	DOI:10.9734/jerr/2021/v21i217445
	K. Sriram,	Author 2
	B. Jayanth	Author 3
	J. Anjaneyulu	Author 4
								-	-
2020-21
National Journal Publications
nil
International Journal Publications
1	Dr. S. Venkataiah	Author 1	1	performance evaluation of two stage cascade refrigeration system using natural refrigerants	International Journal Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / August-20.	Scopus	10.34218/IJARET.11.8.2020.64
2	K. Srinivasa Rao	Author 1	1	Design and analysis of piston made of magnesium silicon carbide (MGSIC)	International Journal Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / August-20.	Scopus	10.34218/IJARET.11.8.2020.027
	Sushmitha Podugu	Author 2
	Sri Sai Sathwika	Author 3
	Swapna Balgar	Author 4
3	Dr. P. V. Gopal Krishna	Author 1	1	Optimization of process parameter in submerged arc welding using cuckoo algorithm	International Journal Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / September-20.	scopus	https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3711914
	Dr. K. Kishore	Author 2
	G. Sravani	Author 3
4	Dr. P. V. Gopal Krishna	Author 1	1	Elastic buckling of aluminium (Al-2024-T3) plate with cut-out using numerical approach	Journal of Xi’an University of Architecture and Technology	1006-7930	12 /  Oct-2020.	scopus	https://www.xajzkjdx.cn/gallery/4-oct2020.pdf
	Dr. K. Kishore	Author 2
	Amith Yadav	Author 3
5	Dr. A. Srinivas	Author 1	1	Analysis of thermally stratified hot water storage tanks by energy principle	High Technology Letters	1006-6748	26 / October-20.	-	-
6	M.Venugopal Reddy*,                 P.Harshita, S.Sreshta	Author 1                  Author 2          Author 3	1	DESIGN AND ANALYSIS OF NON-PNEUMATIC HEXAGONAL TYRE	High Technology Letters	1006-6749	26 / October-20.	-	-
7	Suda Venkateswarulu	Author 1	1	DESIGN OF HVAC SYSTEM FOR OPERATION THEATRES USING HEAT RECOVERY WHEEL	High Technology Letters	1006-6749	26 / October-20.	-	-
8	Dr. K. Kishore	Author 1	1	Optimization of Process Parameters in Abrasive Water Jet Machining by Taguchi Method	High Technology Letters	1006-6749	26 / October-20.	-	-
	Dr. P. V. Gopal Krishna	Author 2
	K. Udaya Kumar	Author 3
	K, Suresh Naik	Author 4
	V. Mani Kumar	Author 5
9	N. Shivateja, P. Siva Raju, Y. Vijay Kumar, N B Sambamurthy*	Author 1                  Author 2          Author 3               Author 4	3	NUMERICAL ANALYSIS OF CONJUGATE NATURAL CONVECTION IN HORIZONTAL CYLINDRICAL ANNULI FILLED WITH AIR AND HELIUM GAS	High Technology Letters	1006-6749	26 / October-20.	-	-
10	Md. Luqhman,                G. Srikanth,                     P. Nandita	Author 1                  Author 2          Author 3	1	PERFORMANCE ANALYSIS ON USING ACETONE,  METHANOL AND GASOLINE FUEL BLENDS IN SPARK IGNITION ENGINE	High Technology Letters	1006-6749	26 / October-20.	-	-
11	VBS Rajendra Prasad    NAVEEN. M            PRANAY NEHANTH R     SHESHANK. C.	Author 1                  Author 2          Author 3               Author 4	1	OPTIMIZATION OF MACHINING PARAMETERS ON CNC TURN LATHE USING REGRESSION ANALYSIS	High Technology Letters	1006-6749	26 / October-20.	-	-
12	T. RamamohanRao            Nithin H.M                      C. J. Daniel                     Dulla Mayank	Author 1                  Author 2          Author 3               Author 4	1	DESIGN AND ANALYSIS OF AIRPLANE WING	High Technology Letters	1006-6749	26 / November-20.	-	-
13	T Krishnachaitanya*, Y. Shiva Kishore,             B. Srujan,                     V. Varun	Author 1                  Author 2          Author 3               Author 4	1	DESIGN AND ANALYSIS OF PUFFER ROBOT	High Technology Letters	1006-6749	26 / November-20.	-	-
14	K. Veladri                            Md. Dawood Ibrahim	Author 1                  Author 2	2	Design and Analysis of 3 - Axis Delta Type Parallel Robot	High Technology Letters	1006-6749	26 / October-20.	-	-
15	Dr. C. Gururaja Rao          K. Aditya, A. Jaswant and Ch. Bhanu Kiran	Author 1                  Author 2          Author 3               Author 4	1	INTERACTION BETWEEN CONDUCTION-CONVECTION- RADIATION FROM AN L-CORNER WITH DISCRETE AND NON-IDENTICAL HEATING	High Technology Letters	1006-6749	26 / October-20.	-	-
16	S.Sreekrishna	Author 1	1	DETERMINATION OF STRESS INTENSITY FACTOR FOR DIFFERENT CRACK SHAPES USING PLASTIC ZONE CONCEPT	High Technology Letters	1006-6749	26 / October-20.	-	-
17	P.Venkatswara Rao, H.H.D.S.S.Arun, Mohammed Khaja Akmal Pasha,                    Rudraraju Lokesh	Author 1                  Author 2          Author 3               Author 4	1	AERODYNAMIC ANALYSIS OF VERTICAL AXIS WIND TURBINE USING CFD	High Technology Letters	1006-6749	26 / October-20.	-	-
18	B. Sandeep, S. Bhanu Prasad, V. Rohith Kumar	Author 1                  Author 2          Author 3	1	EXPERIMENTAL INVESTIGATION OF (Al2O3 + SiC + Gr)  REINFORCED AL7075 HYBRID METAL MATRIX COMPOSITES	High Technology Letters	1006-6749	26 / October-20.	-	-
19	M. Sudhkar	Author 1	1	DEVELOPMENT OF MULTICRITERIA MODEL TO SELECT EFFICIENT RENEWABLE BASED DESALINATION TECHNOLOGY AT REMOTE AREAS IN ANDHRA PRADESH – INDIA	International Journal of Advanced Research in Engineering and Technology (IJARET)	0976-6480	11 / September-20.	scopus	-
20	K. Kishore P.V. Gopal krishna    E. Karunakar	Author 1                  Author 2          Author 3	1	Optimization of Mechanical Properties of AISI 1040 Steel in Submerged Arc Welding Process	Journal of Xi'an University of Architecture & Technology	ISSN No : 1006-7930	Volume XII, Issue X, 2020	-	DOI: 10.34218/IJARET.11.9.2020.097
21	Dr. JALLEDA ANJANEYULU1, V. HARSHA VARDHAN2 & P.CHANDRA KUMAR3	Author 1                  Author 2          Author 3	1	EVALUATION OF MECHANICAL BEHAVIOUR OF GLASS FIBRE-EPOXY WITH GRAPHENE NANO POWDER LAMINATES	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)	ISSN No. : 2249 - 6890	Vol. 10, Issue-3         June 2020	Scopus
22	M. Prabhukiran                K. Kishore P.V. Gopal krishna    G. Ramadevudu	Author 1                  Author 2          Author 3               Author 4	2	Productivity enhancement of Twist Drill Bit by Molybdenum Trioxide (MoO3) Nano-Coatings and Cry-Treatment	Solid State Technology		Volume 63, Issue 2s, 2020	Scopus	-
23	V.B.S. Rajendra Prasad                         Neha P	Author 1                  Author 2	1	Investigation on sandwiched beams with EPDM rubber core for tensile and compressive behavior	Pensee	0031-4773	Volume 51, issue 3, 2021	Scopus	-
2019-20
National Journal Publications
nil
International Journal Publications
1	Dr. C. Gururaja Rao	Author 1	1	Fluid Flow and Heat Transfer Studies on a Discretely and Non-Identically Heated Electronic Board	Journal of Engineering Thermophysics	1810-2328	29 / March-20.	Scopus	[DOI: 10.1134/S1810232820010075]
	Murali Yamala	Author 2
2	Dr. C. Gururaja Rao	Author 1	1	Buoyancy-Aided Conjugate Mixed Convection with Surface Radiation from a Vertical Channel with Multiple Non-Identical Discrete Heat Sources	International Journal for Computational Methods in Engineering Science and Mechanics	1024-123X  1563-5147	21 / March-20.	Scopus	[DOI: 10.1080/15502287.2020.1718799]
	Abhijeet. P. Shah	Author 2
3	V.B.S. Rajendra Prasad	Author 1	1	Identification of Damping Characteristics of EPDM-RUBBER with applications to sandwiched beams and considerations to Engine Mounts for Performance Evaluation	Elsevier Materials Today Proceedings	2214-7853	Jun-20	Scopus	https://doi.org/10.1016/j.matpr.2020.04.317
4	Dr. J. Anjaneyulu	Author 1	1	Evaluation of mechanical behaviour of glass fibre-epoxy with graphene nano powder laminates	International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)	2249–6890	10 / June-20.	Scopus	10.24247/IJMPRD/JUNE-2020/299
	V. Harsha Vardhan	Author 2
	P. Chandra Kumar	Author 3
5	Dr. J. Anjaneyulu	Author 1	1	Design and analysis of a composite T-joint used in automobile chassis	International Journal of Scientific & Engineering Research	2229-5518	11 / April-20.	UGC	IJSER.ORG/RESEARCH PAPER/APRIL-2020
	Niharika Kaza	Author 2
	Prajwala Gavuji	Author 3
6	Prabhu Kiran Martha	Author 1	2	Lifetime and performance improvement of HSS drill bit by titania (TiO2) Nano-coatings and cryogenic treatment	International Journal of Engineering and Advanced Technology	2249-8958	8 / August-19.	Scopus	10.35940/ijeat.F8100.088619
	K. Kishore	Author 2
	G. Ramadevudu	Author 3
7	P. Venkateswara Rao	Author 1	2	Performance study of twisted vaned diffuser in compressor stage	Advances in engineering design and simulation	978-981-13-8467-7	Oct-19	UGC	https://doi.org/10.1007/978-981-13-8468-4_8
	G.V. Ramana Murty	Author 2
	B. Amog	Author 3
	C. Pradeep Reddy	Author 4
8	Ch. Shekar	Author 1	2	Machining of inconel 718 by EDM using taguchi method for optimization of material removal rate and surface roughness	Internal Journal for Research in Applied Science and Engineering Technology	2321-9653	7 / October-19.		10.1016/j.matpr.2020.01.372
	Dr. K. Kishore	Author 2
	P. Laxmi Narayana	Author 3
9	K. Manish Kumar	Author 1	2	Study Of Metallurgical and Mechanical Properties In Submerged Arc Welding With Different Composition Of Fluxes-A Review	Elsevier Materials Today Proceedings		22 / July-19.	Scopus	https://doi.org/10.1016/j.matpr.2020.03.351
	Dr.P.V.Gopalkrishna	Author 2
	Dr. K. Kishore	Author 3
10	Dr. J Anjaneyulu	Author 1	2	Evaluation of mechanical behavior of glass fibre-epoxy composite laminates	Elsevier Materials Today Proceedings		22 / July-19.	Scopus	https://doi.org/10.1016/j.matpr.2020.03.423
	Md Moizuddin	Author 2
	P. Chandra Kumar	Author 3
11	Manojkumar Gudala	Author 1	6	Hydrodynamics and energy analysis of heavy crude oil transportation through horizontal pipelines using novel surfactant	Petroleum Science and Technology	0920-4105	178 / July-2019.	Scopus	https://doi.org/10.1016/j.petrol.2019.03.027
	Shirsendu Banerjee	Author 2
	Tarun Kumar Naiya	Author 3
	Ajay Mandal	Author 4
	Subbaiah T	Author 5
	Dr. T. Ramamohan Rao	Author 6
12	R. Naresh	Author 1	2	Static and Trasient response of a leaf spring with EPDM rubber sanwitched between steel leaves	Elsevier Materials Today Proceedings		22 / July-19.	Scopus
	V.B.S. Rajendra Prasad	Author 2
	G.Venkata Rao	Author 3
2018-19
National Journal Publications
1	Mithil Badam	Author 1	2	CNC plotter developed for plethora machining purposes	Journal of Innovations in Mechanical Engineering	2581-7019	2 / January-19.		http://www.indianjournals.com/ijor.aspx?target=ijor:ijme1&volume=2&issue=1&article=009
	Dr. P.V.S. Subhashini	Author 2
International Journal Publications
1	Dr. P. Venkateswara Rao	Author 1	1	Effect of chord length of a low solidity vaned diffuser on the performance of a centrifugal compressor stage	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/10.pdg
	Dr. G.V. Ramana Murty	Author 2
	B. Amogh – student	Author 3
	C. Pradeep Reddy	Author 4
2	Dr. P.V. Gopal Krishna	Author 1	1	Comparative performance evaluation of stepped and stepless drive in turning	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/06.pdf
	Dr. K. Kishore	Author 2
	K. Srinivasa Rao	Author 3
3	Dr. J. Anjaneyulu	Author 1	1	Design and analysis of automatic lifting and placing machine	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/101.pdf
	K. Srinivasa Rao	Author 2
	K. Jeevan Reddy	Author 3
4	Dr. P.V. Gopal Krishna	Author 1	1	No fault  forward of range counter shaft sub assembly	Global Journal of Engineering Science and Researches	2348-8034	DEC-2018.	UGC	gjesr.com/issues%20PDF/ICAME-2018/10.pdf
	S. Sowmya	Author 2
5	V. Pavan Kumar Chary	Author 1	2	Design and analysis of piston using metal matrix composite (AlSiC)	International Journal of Research	2236-6124	May-19		http://www.iaeme.com/MasterAdmin/Journal_uploads/IJARET/VOLUME_11_ISSUE_8/IJARET_11_08_027.pdf
	K. Srinivasa Rao	Author 2
6	Dr. P.V.S. Subhashini	Author 1	1	Motion analysis of a two link manipulator used in FDM	International Journal of Research	2232-6124	8	UGC
	P. Venkata Raju	Author 2
	T. Krishna Chaitanya	Author 3
7	M. Sudhakar	Author 1	1	Selection of an efficient desalination technology to treat brackish water for domestic application in metropolitan cities in India using multi-criteria analysis	International Journal of Industrial Engineering and Technology		9 / June-19.	UGC	10.24247/ijietjun20194
8	C P Hemanth Vema Reddy	Author 1	2	An experimental study of friction stir welding and dissimilar aluminum alloys	International Journal of Research	2236-6124	8 / June-19.	UGC	http://ijrpublisher.com/gallery/8-june-2019.pdf
	B. Sandeep	Author 2
	K. Kishore	Author 3
2017-18
National Journal Publications
nil
International Journal Publications
1	Dr. PV Gopal Krishna	Author 1	1	Design and analysis of Carbon Fiber Reinforced Composite Shell Structure using Classical Laminate Plate theory	British Journal of Applied Science  and Technology	-	20 / October/2017.	UGC	https://doi.org/10.9734/BJAST/2017/31981
	Ms. Podila Meghana	Author 2
	Mr. A.Sai Kumar	Author 3
	Dr.K.Kishore	Author 4
2	Mr. G. Manoj Kumar	Author 1	3	Studies on the effect of bio additive on viscosity and energy requirement for heavy crude oil flow	International Journal of Petroleum Science and Technology in Mechanical Engineering	0920-4105	Dec-17	scopus	10.1080/10916466.2017.1405030
	Mr. S. Banerjee	Author 2
	Dr. T. Ram Mohan Rao	Author 3
	Mr. N. Tarun	Author 4
	Mr. M. Ajay	Author 5
3	Manojkumar Gudala	Author 1	4	Rheological modeling and drag reduction studies of Indian heavy crude oil in presence of novel surfactant	Petroleum Science and Technology	1091-6466	35 / Nov-2017.	Scopus	https://doi.org/10.1080/10916466.2017.1402034
	Shirsendu Banerjee	Author 2
	Amit Kumar	Author 3
	Dr. T. Rama Mohan Rao	Author 4
	Ajay Mandal	Author 5
	Tarun Kumar Naiya	Author 6
4	Manojkumar Gudala	Author 1	3	The effect of a bio additive on the viscosity and the energy requirement on heavy crude oil flow	Petroleum Science and Technology	1091-6466	Dec-17	Scopus	10.1080/10916466.2017.1405030
	Shirsendu Banerjee	Author 2
	Dr. T. Rama Mohan Rao	Author 3
	Tarun Kumar Naiya	Author 4
	Ajay Mandal	Author 5
5	Mr. J. Anjaneyulu	Author 1	1	Design and dimensional analysis of Mechanisms	SSRG International journal of Mechanical Engineering(SSRG-IJME)	2348 – 8360	May 2017.	UGC	http://www.internationaljournalssrg.org/uploads/specialissuepdf/NCRAME/2017/ME/IJME-NCRAME-P113.pdf
	Ms. Ashwini.V	Author 2
6	Dr. T. Ramamohan Rao	Author 1	1	Multi Objective Optimization of Turning Parameters for A1 6061 Using Genetic Algorithm	Journal of Metallurgy and Materials Science,1.07.2015		July-2017.	ugc	http://www.indianjournals.com/ijor.aspx?target=ijor:jmms&volume=57&issue=4&article=006
7	Manoj Kumar Gudala	Author 1	4	Experimental investigation on hydrodynamics of Two-phase crude oil flow in horizontal pipe with novel surfactant	Journal of Fluids Engineering	061302-1	140 / June 2018.	Scopus	https://doi.org/10.1115/1.4039130
	Shirsendu Banerjee	Author 2
	Ravindra Kumar	Author 3
	Dr. T. Rama Mohan Rao	Author 4
	Ajay Mandal	Author 5
	Tarun Kumar Naiya	Author 6
2016-17
National Journal Publications
nil
International Journal Publications
1	Murali Yamala	Author 2	1	Simulation Studies on Buoyancy-Aided Conjugate Mixed Convection with Radiation from a Vertical Plate with Multiple Non-Identical Heat Sources	Heat Transfer Engineering		38 / Jan-2017.
	Dr. C. Gururaja Rao	Author 1
2	Mr. J. Anjaneyulu	Author 1	1	Variation of a resonant frequency due to static structural loads on a ring laser gyroscope with mechanical ring dither	International Research Journal of Engineering and Technology (IRJET)	2395-0072	4 / April-17.	UGC	https://www.irjet.net/archives/V4/i4/IRJET-V4I4757.pdf
	Mr. C. Narsimhma Reddy	Author 2
	Mr.  M.Santosh Kumar	Author 3
3	K. Venkata Rao	Author 1	1	Variation of resonant frequency due to thermal and loading conditions on torsion bar dither mechanism in ring laser gyroscope	International Journal of Engineering Development and Research	2321-9939	5/2017.	UGC	https://www.ijedr.org/papers/IJEDR1702129.pdf
	K. Veladri	Author 2
	C. Narsimha Reddy,	Author 3
4	Dr. PVS Subhashini	Author 1	1	Parametric Optimization of force during turning Process on Mild steel	International Journal of Engineering Research in Mechanical and Civil Engineering (JERMCE)		2 / May-2017.
	Mrs.T.Roopa	Author 2
5	Dr. PVS Subhashini	Author 1	1	A review on SCARA manipulator for various applications	International Journal of Engineering Research in Mechanical and Civil Engineering (JERMCE)	2456-1290	2 / May-2017.	UGC	01.1617/vol4/iss5/pid26514
	L. Sai Sandeep	Author 2
	E.Karunakar	Author 3
	Dr. N.V.S. Raju	Author 4
6	Mr. Y. Nithin Chandra Manas	Author 1	2	Design development analysis and simulation of Gimball integrated vehicle	International Journal of Engineering Research in Mechanical and Civil Engineering (JERMCE)		2 / May-2017.	UGC
	Dr.PVS Subhashini	Author 2
	Mr. R Krishna Teja	Author 3
7	N. Amulya, PG student	Author 1	1	Parametric Optimization of Heat Generation during Turning Operation	Journal of Mechanical Engineering and Automation 6 (5A)	2163-2405	Vol. 6; pp. 117-120; 20.3.2017	scopus	http://article.sapub.org/10.5923.c.jmea.201601.22.html
	Dr. P.V.S. Subhashini	Author 2
	Dr. N.V.S. Raju	Author 3
	Dr. G. Venkata Rao	Author 4
2015-16
National Journal Publications
nil
International Journal Publications
1	Ms. K. Chinmayi	Author 1	1	Kinematic analysis of SCARA Robot for deburring of rectangular paths	International Journal of Scientific and Engineering Research,	ISSN: 2229-5518	Vol.7, Issue 6, Pp.57 to 62, , June 2016	UGC	https://www.ijser.org/researchpaper/Kinematic-analysis-of-a-SCARA-robot-for-deburring-of-rectangular-paths.pdf
	Mrs. P.V.S. Subhashini	Author 2
	Dr. G. Venkata Rao	Author 3
	Dr. N.V.S. Raju	Author 4
2	Dr. P.V.S. Subhashini	Author 1	1	Videographic Analysis of a SCARA Robot for Deburring of Rectangular Path	Journal of Mechanical Engineering and Automation 6 (5A)	2163-2405	Vol. 6; pp. 109-112; 6.6.2016	scopus	http://article.sapub.org/10.5923.c.jmea.201601.20.html
	Dr. N.V.S. Raju	Author 2
	Dr. G. Venkata Rao	Author 3
	K. Chinmayi, Alumni	Author 4
3	Dr. T. Ramamohan Rao	Author 1	1	Studies on flow of emulsified crude oil through horizontal pipelines	Journal of Modern Chemistry & Chemical Technology	2321–5208	2016	UGC	http://www.stmjournals.com/index.php?journal=JoMCCT&page=article&op=view&path%5B%5D=7197
4	Mounika Nayudu                  V.B.S. Rajendra Prasad         G. Venkata Rao	Author 1                  Author 2                       Author 3	2	On the evaluation of best fit hiper elastic model for sandwich beem with SB rubber core	International Journal of Scientific and Engineering Research,	2229-5518	Vol. 7 , Issue-5, 2016	-	-
2014-15
National Journal Publications
nil
International Journal Publications
1	J. Anjaneyulu	Author 1	1	Theoretical and Experimental Dynamic Analysis of High Speed Mechanism of a Switch Gear	International Journal of Applied Engineering Research	ISSN: 0973-4562	Vol. 10, No.2 (2015)	ugc	ripublication.com/volume/ijaervion3.html
	G. Venkata Rao	Author 2
	G. Krishnamohar Rao	Author 3
2	A. Srikanth	Author 1	1	Design and Fabrication of Drill Chuck for Making a Square Hole	Journal of Material Science and Mechanical Engineering (JMS        ME)	ISSN: 2393-9095	Vol.2, NO.5  April-June 2015;	ugc	https://www.ijedr.org/papers/IJEDR1702254.pdf
	S. Sreekrishna	Author 2
	V.B.S. Rajendra Prasad	Author 3

 

DEPARTMENT OF MECHANICAL ENGINEERING
S. No	Name of the Faculty as Author	No. of Authors	Main Author / Other	Title of the Paper	Name of the Conference	Conference - Date, Month and Year	Organised by with location	ISBN / ISSN No	URL / DOI
2023-24
International Conference Publications
1	G. Sree Lakshmi, Dr. T. Ramamohan Rao, K. Gurubrahman	Author 1                  Author 2          Author 3	1	Investigation on the Strategic Locations of Piezo for Maximum Voltage Generation in Electric Vehicle	International Conference on Ambient Intelligence Knowledge Informatics and Industrial Electronics (AIKIIE-2023)	2-3 November 2023	Rao Bahadur Y. Mahabaleshwarappa Engineering College, Ballari,Karnataka	-	-
2	Sardar Jaspal Singh Dr. K. Kishotre Dr. P. Laxminaraya Dr. A. Parasuramulu	Author 1                  Author 2          Author 3 Author 4	1	Investigation of micro structural and mechanical properties of friction surfacing on low carbon steel using stainless steel grades	International Conference and exposition on mechanical, material and manufacturing technology	October 28-29, 2022	CVR College of Engineerng, Hyderabad	-	https://doi.org/10.1016/j.matpr.2023.04.540
2022-23
International Conference Publications
1	V. Avaneesh Athreya, P. Venkateswara Rao, G.V. Ramana Murty	Author 1                  Author 2          Author 3	1	Numerical Studies on the Effect of the Lean Angle on a Vaned Diffuser in a Centrifugal Compressor Stage	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
2	K.Veladri, Dr. G. Chandra Mohan Reddy, Dr. P. Ramesh Babu	Author 1                  Author 2          Author 3	1	Hyper- Redundant Snake Robot Design and Modeling	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
3	B. V.S. Manish Gupta, M. Hrushikesh, S. Kirthana	Author 1                  Author 2          Author 3	1	Design of Prolate Ellipsoidal Dome for Underwater Missile Applications	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
4	D. Govinda Rao, K. I. Spurgeon, B. Naga Manohar	Author 1                  Author 2          Author 3	1	Design and Analysis of Milling Cutter Tool	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
5	V.B.S.Rajendra Prasad, A. Durgavani	Author 1                  Author 2          Author 3	1	Non-linear Hyper Elastic Behaviour of Air Springs	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
6	K. I. Spurgeon, D. Govinda Rao, B. N. Manohar, Sasanka Neti	Author 1                  Author 2          Author 3 Author 4	1	Allocation of Capacities to Optimize the Production of Vaccines	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
7	Dr. J. Anjaneyulu, Durgam Karna, K. Srinivasa Rao	Author 1                  Author 2          Author 3	1	Design, Analysis, and Fabrication of Composite Mono-Leaf Spring	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
8	P. V. Gopala Krishna, P. Abhinav, P. Chandra Kumar, K. Kishore	Author 1                  Author 2          Author 3 Author 4	1	Investigating the Mechanical Properties of Graphene Based Nano-composites	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
9	Dr. J. Anjaneyulu, K. Veladri, Mohd. Shariuddin	Author 1                  Author 2          Author 3	1	Kinematic & Dynamic Analysis of 3 Link Robot Manipulator	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
10	K. Gurubrahmam, Ch. Prabhakar Rao, T. Rammohan Rao, M. Chandra Sekhar Reddy	Author 1                  Author 2          Author 3 Author 4	1	Modal Analysis of Cancer Cell	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
11	M. Pandarinath, Dr. T. Ramamohan Rao, Dr. Sriram Venkatesh	Author 1                  Author 2          Author 3	1	Statistical Analysis of Musculoskeletal Disorders (MSD) and Work Related Risk Factors of Public Transport Drivers	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
12	PVS Subhashini, A. Sumith Chandra, C. Vijay Dev Reddy	Author 1                  Author 2          Author 3	1	Design and Structural Analysis of 4-DOF Manipulator	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
13	Dr. S. Venkataiah, Shaik Uzeif, Sayeed Khan, Saifullah Khalid	Author 1                  Author 2          Author 3 Author 4	1	Performance Evaluation of a Two Stage Cascade Refrigeration Cycle Using R410A and R507a in HT Cycle with R744 in LT Cycle	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
14	Md Feroz M. Venugopal Reddy	Author 1                  Author 2          Author 3	1	Design and Vibration Analysis of Two Wheelers Helical Spring Shock Absorbers	International Conference on Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)	11th & 12th November 2022 (Online)	Department of Mechanical Engg., VCE, Hyderabad	978-93-93259-89-9	-
15	Dr. S. Venkataiah G. Sthithapragna (Alumni)	Author 1                  Author 2	1	Comprehensive evaluation of nano refrigerants: A review	2nd International Conference and Exposition on Advances in Mechanical Engineering	28-29 June 2022	Collage of Engineering, Pune		Materials today proceedings
16	Dr. S. Venkataiah Irukula Abnhinav Koyyada Akhil (Alumni)	Author 1                  Author 2          Author 3	1	Design, modeling, analysis and fabrication of swiveling conveyor	2nd International Conference and Exposition on Advances in Mechanical Engineering	28-29 June 2022	Collage of Engineering, Pune		Materials today proceedings
17	Sardar Jaspal Singh Dr. K. Kishore P. Laxminarayana A. Parshuramulu	Author 1                  Author 2          Author 3 Author 4	2	Investigation of micro structural and mechanical properties of friction surface on low carbon steel by using stainless steel  grades	Materials Today Proceedings				Materials today proceedings
2021-22
National Conference Publications
1	Dr. P.V.S. Subhashini	Author 1	1	Optimization of parameters  for deburring operation with SCARA	3rd National E-Conference on Emerging Trends in Mechanical Engineering (ETIME 2021)	28-29 Sept 2021	SNIST, Hyderabad	978-0-13-601970-1
2	Dr. P.V.S. Subhashini	Author 1	1	Mathematical derivation and validation of kinematics for 4-DOF manipulator	4th International Conference on Advances in Mechanical Engineering (ICAME 2022)	24-26 March 2022	SRM Institute of Science and Technology, SRM Nagar, Kattankulathur, Chengalpattu, TN-603203
2020-21
National Conference Publications
1	B. Sandeep                          V. Pramod Abu Sufyan Malik       Aravind Reddy	Author 1                  Author 2          Author 3               Author 4	1	Experimental and microstructural investigation of different welding processes on dissimilar metals	National Conference on Advances in Mechanical Engineering	27-28 May 2021	SVNIT, Surat	978-93-5473-914-9
International Conference Publications
nil
2019-20
National Conference Publications
nil
International Conference Publications
1	Dr. P. Venkateswara Rao	Author 1	1	CFD studies on a centrifugal compressor stage with twisted vanes of a low solidity diffuser.	International Conference on “Advances in Material Science and Mechanical Engineering” (ICAMSME-2020)	7-9 February 2020	N.B.K.R. Institute of Science & Technology, Vidyanagar-524413, SPSR Nellore Dist.	-
2	Ch. Shekar	Author 1	2	Material removal rate and surface roughness on machining of inconel 718 by electrical discharge machine using taguchi technique	Internal conference on Advanced Light-weight Materials and  Structures (ICALMS-2k20)	Oct-19			https://doi.org/10.1016/j.matpr.2020.01.372
	Dr. K. Kishore	Author 2
	P. Laxmi Narayana	Author 3
3	Ch. Shekar	Author 1	3	Optimization of process parameters on EDM for inconel 718	International conference on ICIME 2019	/ 2019.
	U. Ashok Kumar	Author 2
	Dr. K. Kishore	Author 3
	P. Laxmi Narayana	Author 4
2018-19
National Conference Publications
1	Dr. J. Anjaneyulu	Author 1	1	Kinematic analysis of PUMA 762 manipulator	3rd national conference on Advances in Engineering, Technology and Sciences – NCAETS 2019	04.04.2019	Spoorthy Engineering College, Nadargul, Hyderabad		-
2	K.Veladri Dr.P.V.Gopalkrishna	Author-1 author-2	1	Recycling of iron and steel making by products: A review	5th National Conference on Apllied Physiscs and Material Science	7-8 the Sept 2018	Dept of Physics, VCE,Hyd
International Conference Publications
1	S.Kirthana	Author 1	1	Static structural analysis on femur bone using different plate materials	International Conference on Materials, Manufacturing and Modelling (ICMMM)	29-31 Mar 2019	VIT, Vellore		https://doi.org/10.1016/j.matpr.2020.03.354
2	S.Kirthana	Author 1	1	A FEA on  assemble fractured human femur bone with and without HA coated prosthetic plate material	International Conference on Materials, Manufacturing and Modelling (ICMMM)	29-31 Mar 2019	VIT, Vellore		https://doi.org/10.1016/j.matpr.2020.03.422
3	V.B.S. Rajendra Prasad	Author 1	1	Static and transient response of leaf  spring with EPDM rubber sandwiched between steel leaves	International Conference on Materials, Manufacturing and Modelling (ICMMM)	29-31 Mar 2019	VIT, Vellore		https://doi.org/10.1016/j.matpr.2020.03.286
	R. Naresh	Author 2
	Dr. G. Venkata Rao	Author 3
4	V.B.S. Rajendra Prasad	Author 1	1	Static and fatigue  analysis of  leaf spring with  rubber sandwiched steel layer	International Conference UICETE	29-31 Mar 2019	OU, Hyderabad		https://doi.org/10.1016/j.matpr.2020.03.286
5	Mrs. S. Kirthana	Author 1	1	Reconstruction of femur bone from DICOM files and FEA on fractured muman femur bone with PEEK thermoplastic prosthetic plate implantation	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India		10.1007/978-981-13-8468-4_10
6	G. Pradeep Kumar	Author 1	2	Convergent modeling and FE based structural analysis of patient specific cranial implant in supine sleeping position	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Dr. T. Ramamohan Rao	Author 2
7	B Shreya – BE student	Author 1	3	FDM and 3D modeling of patient specific cranial implant from DICOM images and finite element analysis of various infilled patterns	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	G. Pradeep Kumar – PG	Author 2
	Dr. T. Ramamohan Rao	Author 3
8	Dr. P. Venkateswara Rao	Author 1	3	Performance study of twisted vaned diffuser in a compressor stage	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Dr. G.V. Ramana Murty	Author 2
	B. Amogh	Author 3
	C. Pradeep Reddy	Author 4
	J. Karthik Reddy	Author 5
9	V.B.S. Rajendra Prasad	Author 1	1	Dynamic response of rubber based sandwiched beams for impact loading	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Md. Idrees	Author 2
10	Dr. P.V.S. Subhashini	Author 1	1	Parametric optimization of fused deposition modeling using multi objective techniques	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Ms. G. Sneha	Author 2
	Mrs. Ch. Amareswari	Author 3
11	Dr. P.V.S. Subhashini	Author 1	1	Modeling of two link manipulator used for 3D printing	NAFEMS Conference 2018 Engineering Modelling, Analysis, Simulation and 3D Printing	20-21 July, 2018	NAFEMS, Bengaluru, India
	Prof. B. Anjaneya Prasad	Author 2
	Mrs. Navaneetha Kasa	Author 3
12	V.B.S. Rajendra Prasad	Author 1	1	Identification                  of damping characteristics of EPDM and application of engine mounts for performance evaluation	International Conference on Advances in Materials and Manufacturing Applications-IConAMMA-2018	17-18 August 2018	Amrita Vishwa Vidyapeetham, Bengaluru
13	Md Idrees	Author 1	2	Response of Rubber based Engine Mounts with SBR as Core rubber	IOP Conference Material Science and Engineering				10.1088/1757-899x/455/1/012108
	V.B.S. Rajendra Prasad	Author 2
2017-18
National Conference Publications
1	Dr. S. Venkataiah	Author 1	1	Thermodynamics analysis of two stage cascade refrigeration system using natural refrigerants	National Conference on Advances in Mechanical Engineering & Nano Technology (AMENT 2018)	29-30 June 2018	UCE (A), OU, Hyderabad
International Conference Publications
1	Dr. P.V.S. Subhashini	Author 1	1	A review on fused deposition modeling	1st International Conference on Innovations in Mechanical Engineering (ICIME-2018)	5-6 January 2018	Gurunanak Institution of Technology
	G. Sneha	Author 2
2	S. Kirthana	Author 1	1	Finite element analysis and  topology optimization of engine mounting bracket	ICMPC-2018	16-18 March 2018	Gokaraju Rangaraju Institute of Engineering & Technology
	Mohammed Khaja Nizamuddin	Author 2
2016-17
National Conference Publications
1	S Samuel Abhishek(M.E)	Author 1	2	Trajectory Planning of a Mobile Robot	National Conference on Technological Advancements in Mechanical Engineering (TAME-16)	on 22nd & 23rd July 2016	University College of Engineering Kakinada(A) JNTUK Kakinada A.P. India.
	K.Veladri	Author 2
2	Parsha shiva	Author 1	2	Opto-Mechanical Design and Analysis of Imaging InfraredSeeker Optics	National Conference on Technological Advancements in Mechanical Engineering (TAME-16)	on 22nd & 23rd July 2016	University College of Engineering Kakinada(A) JNTUK Kakinada A.P. India.
	Mr.J.Anjaneyulu	Author 2
	Dr.S.Satyavathi	Author 3
3	G Chandu,	Author 1	2	FE Analysis of An Opto-Mechanical Housing and Lenses of an IIR System	National Conference on Technological Advancements in Mechanical Engineering (TAME-16)	on 22nd & 23rd July 2016	University College of Engineering Kakinada(A) JNTUK Kakinada A.P. India.
	Mr.J.Anjaneyulu	Author 2
	Dr.S.Satyavathi	Author 3
4	S.Venkataiah,	Author 1	1	Performance evaluation of single cylinder diesel engine using palm stearin bio diesel and its blends	National Conference on Technological Advancements in Mechanical Engineering (TAME-16)	on 22nd & 23rd July 2016	University College of Engineering Kakinada(A) JNTUK Kakinada A.P. India.
	Ayilla Mahender goud,	Author 2
	Mohd.Ahsenali	Author 3
	Sai Chand.K.	Author 4
5	P. Raju (PG Student)	Author 1	1	Effect of sand composition on quality in shell moulding	National Conference on “Advances in Mechanical Engineering” (AIM 2016)	6-7 Oct-2016 pp 111-114	MED, VCE, Hyderabad	ISBN: 978-93-82570-82-0
	B. Radhakrishna	Author 2
6	A Bahnu Prakash	Author 1	1	Conversion of four stroke engine to compressed air engine	National Conference on “Advances in Mechanical Engineering” (AIM 2016)	6-7 Oct-2016 pp 111-114	MED, VCE, Hyderabad	ISBN: 978-93-82570-82-0
	T Bhau Prasad	Author 2
	Baradi Maniveer	Author 3
	K Aakash  - UG students	Author 4
	N.B. Sambamurthy	Author 5
7	S. Venkateswarulu	Author 1	1	Economical and efficient design of HVAC system using heat recovery wheel	National Conference on “Advances in Mechanical Engineering” (AIM 2016)	6-7 Oct-2016 pp 111-114	MED, VCE, Hyderabad	ISBN: 978-93-82570-82-0
	P. Venkateswara Rao	Author 2
8	M. Sai Nikhil	Author 1	1	A review on cascade refrigeration systems	National Conference on “Advances in Mechanical Engineering” (AIM 2016)	6-7 Oct-2016 pp 111-114	MED, VCE, Hyderabad	ISBN: 978-93-82570-82-0
	R.V. Datta Sai Pavan	Author 2
	S. Venkataiah	Author 3
9	P. Venkateswara Rao	Author 1	1	Three dimensional numerical simulation of fluid flow in a can type gas turbine combustor	National Conference on “Advances in Mechanical Engineering” (AIM 2016)	6-7 Oct-2016 pp 111-114	MED, VCE, Hyderabad	ISBN: 978-93-82570-82-0
	A Hemanth	Author 2
	S. Sriteja	Author 3
	D.P. Vamsi Krishna	Author 4
10	B. Radhakrishna	Author 1	1	Optimizing the carbon phenolic prepregging process parameter using taguchi technique	National Conference on “Advances in Mechanical Engineering” (AIM 2016)	6-7 Oct-2016 pp 111-114	MED, VCE, Hyderabad	ISBN: 978-93-82570-82-0
	Dr. P.V. Gopal Krishna	Author 2
	Dr. K. Kishore	Author 3
11	Mr.A.Nagaraju	Author 1	1	Design and Manufacture of Elevating Mechanism	COMET 2017, IIT(BHU)	28,29th January 2017	Varanasi, India
	Mr. VBS Rajendra Prasad	Author 2
	Mr. Krishnateja	Author 3
12	Mr. Md Nizamuddin Ahmed	Author 1	1	Modeling and Simulation of 7-DOF Robotic Manipulator	National Conference on Technological Advancements in Mechanical Engineering (TAME-16)	on 22nd & 23rd July 2016	University College of Engineering Kakinada(A) JNTUK Kakinada A.P. India,
	Mr. K.Veladri	Author 2
13	Mr. K.Veladri	Author 1	1	Design of Vision based object tracking system for robotic applications	National Conference on Technological Advancements in Mechanical Engineering (TAME-16)	on 22nd & 23rd July 2016	University College of Engineering Kakinada(A) JNTUK Kakinada A.P. India,
	D. Sai Deepak	Author 2
International Conference Publications
1	Mr. D. Devaiah	Author 1	2	Optimal FSW process parameters for dissimilar aluminium alloys (AA5083 and AA6061) using Taguchi Technique	International Conference on Material processing characterization (ICMPC 2017)  GRIET, Hyderabad	2017	GRIET, Hyderabad		https://doi.org/10.1016/j.matpr.2017.12.031
	Dr. K. Kishore	Author 2
	Dr. P. Laxmi Narayana	Author 3
2	Dr. P.V.S. Subhashini	Author 1	1	Placement analysis of rectangular components within the work volume using SCARA Robot	2nd Biennial International Conference on Nascent Technologies in Engineering	28.01.2017	Fr.C.Rodrigues Institute of Technology, Vashi, Navi Mumbai		10.1109/ICNTE.2017.7947973
	Dr. N.V.S. Raju	Author 2
	Dr. G. Venkata Rao	Author 3
	K. Chinmayi	Author 4
3	Mr.A.Nagaraju	Author 1	2	Hyper elastic behavior of rubber dampers subjected to transient loading	2nd International Conference on Mechanical and Manufacturing Engineering (ICMME – 2017)	6th and 7th April, 2017	Dept. of Mechanical Engg., Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya, Enathur, Kanchipuram.		10.1007/978-3-319-41132-3_33
	Mr. VBS Rajendra Prasad	Author 2
4	Dr. P.V.S. Subhashini	Author 1	1	Analysis and optimization of parameters for friction stir welding	3-day International Conference on “Materials Manufacturing & Modeling” (ICMMM 2017)		5		https://doi.org/10.1016/j.matpr.2018.02.216
	Y Nithin Chandra Manas	Author 2
5	Dr. P.V.S. Subhashini	Author 1	1	Parametric optimization of surface roughness using a SCARA manipulator	3-day International Conference on “Materials Manufacturing & Modeling” (ICMMM 2017)		5		https://doi.org/10.1016/j.matpr.2018.02.171
	N. Amulya	Author 2
	S. Kirthana	Author 3
	G. Pradeep	Author 4
6	Dr. P.V.S. Subhashini	Author 1	1	Parametric optimization of link lengths of a SCARA robot for deburring of rectangular paths”	3-day International Conference on “Materials Manufacturing & Modeling” (ICMMM 2017)		5		https://doi.org/10.1016/j.matpr.2018.02.117
	K. Chinmayi	Author 2
7	Mohan Kumar M	Author 1	1	Evaluation of damage tolerance of a spar in an aircraft wing	1st structural integrity conference and exhibition (SICE-2016)	July 4-6 July 2016	Bangalore, India
	Vivek Sekhar (PG student)	Author 2
	V.B.S. Rajendra Prasad	Author 3
	Surendra C	Author 4
8	V.B.S. Rajendra Prasad	Author 1	1	Dynamic Hyper Elastic Behavior of Compression Shock Loaded Vibration Dampers	Conference on Dynamics Behavior of Materials   - Society for Experimental Mechanics ;  13th International Congress & Exposition on Experimental and Applied Mechanics	6-9 July, 2016	Hilton Orlando Lake Buena Vista @ Walt Disney World Resort, Orlando, Florida, USA
	Dr. G.Venkata Rao	Author 2
9	Amit Yadav,	Author 1	1	Buckling Analysis of Aluminium (Al-2024-T3) plate with cut-outs using FEM	NAFEMS India Conference on Engineering Modeling, Analysis, Simulation and 3D Printing (NAFEMS-3D 2016)	August 29-31 2016,	Bangalore, India,
	P V Gopal Krishna	Author 2
	K. Kishore	Author 3
10	V. Jaideep	Author 1	1	Analysis of a bolted joint under pretightening and external load	NAFEMS India Conference on Engineering Modeling, Analysis, Simulation and 3D Printing (NAFEMS-3D 2016)	August 29-31 2016,	Bangalore, India,
	V. Narayanamurthy	Author 2
	V.B.S. Rajendra Prasad	Author 3
11	Mr. P Venkateswara Rao	Author 1	1	Study on effect of Twist direction in a diffuser vane on the performance of a centrifugal compressor stage	International Conference on Fluid Mechanics and Fluid power,	15-17 th December 2016,	MNNITA, Allahabad,U.P, India
	Dr.G.Venkata Rao	Author 2
	Dr.GV Ramana Murty	Author 3
12	Mr. BR Chandan	Author 1	2	Evaluation of Mechanical properties of medium carbon low alloy forged steels by polymer quenching	International Conference on Advanced Material technologies (ICAMT-2016),	27th, 28th December 2017,	Professional group of conferences, Anakapalli, Visakhapatnam, Andhra Pradesh, India
	Mr. V Pramod	Author 2
	Mr. CM Ramesha	Author 3
	Mr. V Sharanraj	Author 4
13	Mr. Pranav Ravindran Nair	Author 1	1	Optimization of the Process Parameters of the WEDM of a stainless steel 440C Component	International All India Manuifacturing, Design and Research Conference(AIMTDR-2016),	2016	College of Engineering, Pune, Maharastra, India
	Mr. A.Raghavendra Bhat	Author 2
	Dr. K.Kishore	Author 3
2015-16
National Conference Publications
nil
International Conference Publications
1	P.V.S. Subhashini	Author 1	1	Energy expended in robotic deburring of circular components using a SCARA Robot	IMECE-2015	13-19 Nov-2015	ASME, George R. Brown Convention Center, Houston, Texas, U.S.A.
	Prof. N.V.S. Raju	Author 2
	Dr. G. Venkata Rao	Author 3
2	Mr. P. Venkateswara Rao	Author 1	1	CFD analysis of effect of diffuser vane setting angle and shape on the performance of centrifugal compressor stage.	2-day Internatioanl Conference – ASME GT India, 2015	2nd & 3rd Dec-15	international convention center, Novotal & HICC complex, Hyderabad.
	Dr. G.V. Ramana Murty	Author 2
	Dr. G. Venkata Rao	Author 3
	Students: (2015 out going)	Author 4
	P. Naga Vamshi,	Author 5
	Badisa Sivaram	Author 6
3	Mrs. P.V.S. Subhashini	Author 1	1	Parametric Optimization of Link Lengths of a SCARA Robot for Deburring of Circular Paths	28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (CARS & FOF 2016)	on 6th to 8th January, 2016	College of Engineering & Management, Kolaghat.
	Prof. N.V.S. Raju	Author 2
	Dr. G. Venkata Rao	Author 3
4	Dr. T. Ramamohan Rao	Author 1	1	Developing a GUI for optimization of accoustic enclosure of a compressor chamber	28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (CARS & FOF 2016)	on 6th to 8th January, 2016	College of Engineering & Management, Kolaghat.
	S. Kirthana	Author 2
5	Mr. J. Anjaneyulu	Author 1	1	Stress analysis of a circuit breaker switch gear mechanism by using multi body dynamics	28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (CARS & FOF 2016)	on 6th to 8th January, 2016	College of Engineering & Management, Kolaghat.
	Dr. G. Krishna Mohan Rao	Author 2
	Dr. G. Venkata Rao	Author 3
6	Mr. V.B.S. Rajendra Prasad	Author 1	1	On the hyper-elastic behaviour and characterisation of SB rubber	International Conference on Technological Innovations in Mechanical Engineering (TIME-2016)	10th – 11th February 2016	Dept. of Mechanical Engineering & Prod. Engg., CBIT, Hyderabad and IRD India		Received Best Paper Award
	Dr. G. Venkata Rao	Author 2
	Ms. Mounika Naidu, PG student	Author 3
7	Mr. J. Anjaneyulu	Author 1	1	Opto mechanical design of imaging infrared system	International conference on emerging trends in engineering and technology IFERP,	26.06.2016
	Dr. G. Krishna Mohan Rao	Author 2
	Dr. G. Venkata Rao	Author 3
2014-15
National Conference Publications
1	Mr. V.B.S. Rajendra Prasad	Author 1	1	Elastic visco-elastic modelling of metal-to-rubber sandwich vibration dampers	Two day National Conference on “Recent Research Advances in Civil Engineering” (RRACE 2014)	7-8 November 2014	CED, UCE (A), OU, Hyderabad	ISBN No. 978-93-8363-536-8
	Dr. G.Venkata Rao	Author 2
	Ms. Syeda Amatul Quadeer	Author 3
2	Ms. P.V.S. Subhashini	Author 1	1	Videographic analysis of deburring operation on a fabricated SCARA robot	National Conference on Emerging Trends in Mechanical Engineering (ETIME 2014)	29-30 December, 2014 ,	MED, UCE, OU
	Dr. G. Venkata Rao	Author 2
3	A. Sai Kumar (ME student)	Author 1	2	Dynamic Stiffness Analysis of Torsional Vibrations of Thin-Walled Open-Secton Beams Resting on Winkler-Pasternak Foundation	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-107	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	K. Srinivasa Rao	Author 2
	M. Radha Krishna, IICT	Author 3
4	J. Anjaneyulu	Author 1	4	Stress Analysis of High Speed Mechanism of a 69 KV-SF6 Switch Gear	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-108	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	G. Krishnamohan Rao	Author 2
	G. Venkata Rao	Author 3
	S. Sreekanth (PG student)	Author 4
5	Md. Zameer	Author 1	3	Behaviour of Vulcanized Rubber and EPDM Rubber under High Rates of Compression Loading: Application to Vibration Damping	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-109	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	G. Venkata Rao	Author 2
	V.B.S. Rejendra Prasad	Author 3
6	P.V.S. Subhashini	Author 1	1	Analysis of SCARA Robot for Deburring of Rectangular Paths	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-110	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	N.V.S. Raju	Author 2
	G. Venkata Rao	Author 3
	M. Madhuri (PG student)	Author 4
	G. Srilekha (UG student)	Author 5
	D. Sneha (UG student)	Author 6
7	M. D.K. Reddy, BE student	Author 1	4	Design and Fabrication of Mechanical Grass Cutter	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-111	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	B. Jagadeesh, BE student	Author 2
	B Suman, BE student	Author 3
	S. Sreekrishna	Author 4
8	G. Rahul, BE Student	Author 1	4	Analysis of Pump Less Vapor Absorption Refrigeration System	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-107	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	G.N. Rakesh Rao, BE Student	Author 2
	P. Jayavardhan, BE Student	Author 3
	S. Venkataiah	Author 4
9	P. Venkateswara Rao	Author 1	1	Numerical Analysis of Effect of Diffuser Vane Setting Angle on the Performance of a Centrifugal Compressor Stage	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-108	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	G.V. Ramana Murthy	Author 2
	G. Venkata Rao	Author 3
	P. naga Vamsi, BE Student	Author 4
	B. Sivaram, BE Students	Author 5
	Jitendra Dubey, BE Student	Author 6
10	S. Venkataiah			A Review on Alternative Refrigerants to Replace R22 in Air Conditioning Applications	Proceedings of the 5th National Conference ; Advances in Mechanical Engineering (AIM 2015)  AIM 2015 DE-109	May 1-2, 2015	MED, VCE, HYD	ISBN NO. 978-93-82570-59-2
	G. Venkata Rao
International Conference Publications
1	Mr. P. Venkateswara Rao	Author 1	1	Performance comparison of twisted low solidity vaned diffusers with different shapes	59th Turbo Expo Turbine Technical Conference and Exposition	18-Sep-14	presented by ASME International Gas Turbine Institute	ISBN: 978-0-7918-4563-9
	Dr. G.V. Ramana Murty	Author 2
	Dr. G. Venkata Rao	Author 3
2	Mr. P. Venkateswara Rao	Author 1	1	“CFD Analysis of Impeller-Diffuser Interaction in a Centrifugal Compressor with Twisted Vaned Diffuser”	5th International and 41st National conference	13th December 14	Fluid Mechanics and Fluid Power, IIT Kanpur
	Dr. G.V. Ramana Murty	Author 2
	Dr. G. Venkata Rao	Author 3
3	Mr. P. Venkateswara Rao	Author 1	1	“Analysis of Flow Through a Twisted Vaned Diffuser”	3rd International ASME 2014 GT India Conference	16-Dec. 14	3rd International ASME 2014 GT India Conference, New Delhi,
	Dr. G.V. Ramana Murty	Author 2
	Dr. G. Venkata Rao	Author 3
4	P.V.S. Subhashini	Author 1	1	Studies on robotic deburring using a SCARA Robot	International conference on Robotics, Automation, Control and Embedded Systems (Race 2015)	18-20 February, 2015	Dept. of Electronics and Instrumentation Engineering, Hindustan University, Chennai
	Dr. G. Venkata Rao	Author 2
5	M.Sudhakar	Author 1	1	Desalination Techonology Selection : Two possible approaches, the conventional approach and MCE approach	International conference on polygeneration,	18-20 February  2015,	Anna University Chennai.
	M. Srinivas	Author 2