Summary Sheet

A Y

Research Publications - Journal

Research Publications - Conferences

Total

National

International

National

International

2023-24

0

11

0

2

13

2022-23

0

14

0

16

30

2021-22

0

5

1

1

7

2020-21

0

23

1

0

24

2019-20

0

12

0

3

15

2018-19

1

8

2

13

24

2017-18

0

7

1

2

10

Grand Total:

123

DEPARTMENT OF MECHANICAL ENGINEERING

S. No

Name of the Faculty as Author

Total Authors in the order of appearance

Main Author / Other

Title of the Paper

Name of the Journal

ISBN / ISSN No

Vol / Month & Yr.

Indexing No. UGC / Scopus

URL / DOI

2023-24

National Journal Publications

nil

International Journal Publications

1

V  Sumanraju

Author 1

Constant Steam Inlet Conditions and their Impact on the Thermal Efficiency of a
Cogeneration Power Plant

International Journal of Heat and Technology

-

Vol. 41, No. 4, August, 2023, pp. 847-853

Scopus

https://doi.org/10.18280/ijht.410407

Dr. T. Ramamohan Rao

Author 2

Narasimhulu Sanke

Author 3

2

K. Santhosh Kumar

Author 1

Harmonizing Muffler Design: The Virtuoso
Performance based on Inlet Diameter, Outlet Diameter and Material in Orchestrating Transmission Loss

Journal of Propulsion Technology

1001-4055

Vol. 44 No. 4 (2023)

-

-

Dr. K. Kishore

Author 2

Dr. P. Ushasri

Author 3

3

Yamala Muralikrishna

Author 1

Parametric and comparative studies on fluid flow and heat transfer from uniformily and non uniformily heated plates

SPRINGER NATURE International Journals : Journal of Thermal Analysis and Calorimetry [JTAC]

-

07.12.2023

SCOPUS, SCI and SCIE

https://doi.org/10.1007/s10973-023-12730-z

Dr. C. Gururaja Rao

Author 2

4

Dr. C. Gururaja Rao

Author 1

Interactive influence of conduction-convection-Radiation on heat transfer from a discretely anf non identically heated elrctronic gadget

SPRINGER NATURE International Journals :Journal of Engineering Thermophysics [JET]

Accepted on 26.10.2023

SCOPUS and SCIE

K. Aditya

Author 2

5

V  Sumanraju

Author 1

Optimization of process parameters for enhancing overall efficiency: Experiment analysis and regression modeling

International Journal of Interactive Design and Manufacturing

-

13-Dec-23

Scopus

https://doi.org/10.1007/s12008-023-01626-9

Dr. T. Ramamohan Rao

Author 2

Narasimhulu Sanke

Author 3

6

Mukesh Kumar Tripati
Dhanunjay Makteder
DN Vasundhara
Dr. Ch VKNSN Moorthy
Preeti Patil
Shivendra

Author 1
Author 2
Author 3
Author 4
Author 5
Author 6

Residual life assessment (RLA) analysis of apple disease based on multimodal deep learning model

International journal of intellegence systems and applications in engineering

21476799

Nov-23

scopus

7

Koteswara Rao B
Kodanda Rama Rao Ch
V Srinivas
Dr. Ch VKNSN Moorthy
Gandhi Pullajura

Author 1
Author 2
Author 3
Author 4
Author 5

PhysicoiChemical and tribological prpperties of commercial oil-bio-lubricant mixures dispersed with graphene nanoplatelets

RSC Advances

8

Myneni Madhubala
D N Vasundhara
Akkineni Haritha
Dr. Ch VKNSN Moorthy

Author 1
Author 2
Author 3
Author 4

Design development and analysis of cognitive assisting aid with multisensor fused navigation for visually in paired people

Journal of big data

9

Markndeyulu Vuggirala
N Alagappan
Dr. Ch VKNSN Moorthy

Author 1
Author 2
Author 3

The role of nanofluids in the performance augmentation for the solar collectors used in solar water heating

International Journal of Ambient Energy

Scopus

10

K Pavan Kumar
Y Suresh
Pesn Krishna Prasad
Dr. Ch VKNSN Moorthy
A S Sai Prasad

Author 1
Author 2
Author 3
Author 4
Author 5

Image feature encoding using lownerization tensor

Journal of Theoritical and Applied Information Technology

1992-8645

Scopus

11

Harith A
Madhu bala M
B.Padmaja
Dr. Ch VKNSN Moorthy
Ravi Teja CMS

Author 1
Author 2
Author 3
Author 4
Author 5

Analysis of data privacy and anonymity aspects of contact tracing apps via smartphones - A use case of COVID -19

Journal of multimedia

12

D. Veerababu
C. Sachin
P. V. S. Subhashini
B. Venkatesham

Author 1
Author 2
Author 3
Author 4

Acoustic Modeling and Analysis of Automotive Air- Filters

Article  in  The International Journal of Acoustics and Vibration

Vol. 28, No. 4, 2023 (pp. 353–361) Dec-2023

Scopus

 10.20855/ijav.2023.28.41959

2022-23

National Journal Publications

nil

International Journal Publications

1

Dr. S. Venkataiah

Author 1

1

Investigation of intercooler fins of a two stage reciprocating air compressor

UPB Scientific Bulletin, Series D: Mechanical Engineering

1454-2358

Vol.84, Issue-4, 2022

Scopus

https://www.scientificbulletin.pub.ro/rev_docs_arhiva/rezdd1_896970.pdf

G. Sthithapragna

Author 2

N Nagaraju

Author 3

K. Vivek yadav

Author 4

2

Guru Brahmam

Author 1

Study on added damping due to resistive shunting on cantilever, simply supported beam, and effect on the variation of amplitude at resonance.

Journal of Mechanical Engineering Science

-

-

Scopus

doi:10.1177/09544062221132186
02.11.2022

Dr. T. Ramamohan Rao

Author 2

M. Chanddra Sekhar Reddy

Author 3

3

Guru Brahmam

Author 1

Sensitive analysis on aided damping of shunted piezoceramic damping: Cantilever and simply supported beam

Journal of Vibroengineering

-

-

Scopus

Accepted on 08.12.2022

Dr. T. Ramamohan Rao

Author 2

M. Chanddra Sekhar Reddy

Author 3

4

Dr. S. Venkataiah

Author 1

Performance evaluation of vapour compression refrigeration system for a air conditioning applications using R-22 and R-410A as refrigerants various evoparating termperatures

International Journal for Research and Development in Technology

2349-3585

Vol. 18, issue 6, DEC-2022

Peer Reviewed

5

Dr. S. Venkataiah

Author 1

Performance evaluation of vapour compression refrigeration cycle for airconditioning applications with R-22, R-290 and R-600a as refrigerants

International Journal Research Publication and Reviews

2582-7421

Peer Reviewed

6

Dr. PV Rao

Author 1

1

Three dimensional studeis on flow distributions in savonious rotors

International Research Journal of Engineering and Technology

2395-0056 (e)
2395-0072(p)

Vol. 9, issue 11, Nov-2022

Peer Reviewed

7

Dr. PV Rao

Author 1

1

Numerical Investigations on Savonious Wind Rotors

International Journal for Research and Development in Technology

2349-3585

Vol. 18, issue 6, DEC-2022

Peer Reviewed

8

Dr. PV Rao

Author 1

1

Effect of environmental factors on the performance of savonious wind rotor

International Journal of Scientific Research and Engineering Trends

2395-566X

Vol. 8, issue 6, NOV-DEC-2022

Peer Reviewed

9

Dr. Ch.V.K.N.S.N. Moorthy

Author 4

Other

Numerical study Bio-Inspired Corrugated Airfoil Geometry in a Forward Flight at a Low Reynolds Numbers

WSEAS Transactions on Fluid Mechanics

2224-347X

Vol. 17, July 2022

Scopus

Doi:10.37394/232013.2022.17.12

10

Guru Brahmam

Author 1

Study on Prediction of Added Damping from Inclined PZT‑5 H
for Bending and Torsional Modes

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering

Scopus

Accepted on 03.03.2023

Dr. T. Ramamohan Rao

Author 2

M. Chanddra Sekhar Reddy

Author 3

11

Dr. K. Kishore

Author 1

A review on enhancement of developing noiceless suction muffler for reciprocating compressor

International Journal of Mechanical Engineering

2367-8968

Jun-23

Peer Reviewed

12

Dr. Ch.V.K.N.S.N. Moorthy
A. Srivastav
DN Vasundhara
V Suryanarayana Reddy
AS Sai Prasad

Author 1
Author 2
Author 3
Author 4
Author 5

Robotics process automation - The Ineluctable virtual workforce in various business sectors: Post covid-19 scenario

International Journal of Engineering Trends and Technology

2231-5381

Mar-23

13

S. Bhanutaja
V Srinivas
Dr. Ch.V.K.N.S.N. Moorthy
J Sai Kumar
B Laxmipathi Raju

Author 1
Author 2
Author 3
Author 4
Author 5

Prediction of thermophysical properties of hybrid nanofluids using machine learning algorithms

International Journal Interactive Design and Manufacturing

Apr-23

14

B Padmaja
Dr. Ch VKNSN Moorthy
N. Venkateswarulu
Myneni Madhubala

Author 1
Author 2
Author 3
Author 4

Exploration of issues, challenges and latest developments in autonomous cars

Journal of big data

Scopus

2021-22

National Journal Publications

nil

International Journal Publications

1

Dr. K. Kishore

Author 1

1

Condition monitoring and flow control of cutting fluid using IoT for drilling operation

International Journal of Creating Research Toughts

2320-2882

Vol.9, Issue-10, Oct-2021

-

https://ijcrt.org/papers/IJCRT2110015.pdf

H. Rohit

Author 2

2

Dr. P.V.S. Subhashini

Author 1

1

Parametric optimization of fused depositon modeling using multi objective techniques

Journal of Nano Technology and Smart materials

Vol.7, Issue-105, pp 1-12; Mar 2022

-

Parametric-Optimization-of-Fused-Deposition.pdf (jscholarpublishers.com)

G. Sneha

Author 2

3

Jayanth Burri

Author 1

5

Desing and analysis of chasis for a FSAE Car

International Journal of Engineering Research Technology

2278-0181

Vol.10, Issue 11, pp 369-373   Nov-2021

-

DOI : 10.17577/IJERTV10IS110177

Anirudh Kyatham

Author 2

Sriram Kata

Author 3

Koushik Alapati

Author 4

Dr. P.V.S. Subhashini

Author 5

4

K. Anirudh,

Author 1

4

Design and Analysis of Suspension System For An FSAE Car

Turkish Online Journal of Qualitatuve Inquiry (TOJQI)

Volume 12, Issue 9, August 2021, Pages: 4693-4706

-

View of Design and Analysis of Suspension System for an FSAE car (tojqi.net)

K. Sriram, 

Author 2

B. Jayanth

Author 3

J. Anjaneyulu

Author 4

5

1. K. Anirudh,

Author 1

4

Design And Kinematic Analysis Of Suspension System For A Formula Society Of Automotive Engineers (FSAE) Car

Journal of Engineering Research and Reports

2582-2926

Article no.JERR.75066: 21(2), October 2021, pages: 48-63

-

DOI:10.9734/jerr/2021/v21i217445

K. Sriram, 

Author 2

B. Jayanth

Author 3

J. Anjaneyulu

Author 4

-

-

2020-21

National Journal Publications

nil

International Journal Publications

1

Dr. S. Venkataiah

Author 1

1

performance evaluation of two stage cascade refrigeration system using natural refrigerants

International Journal Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / August-20.

Scopus

10.34218/IJARET.11.8.2020.64

2

K. Srinivasa Rao

Author 1

1

Design and analysis of piston made of magnesium silicon carbide (MGSIC)

International Journal Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / August-20.

Scopus

10.34218/IJARET.11.8.2020.027

Sushmitha Podugu

Author 2

Sri Sai Sathwika

Author 3

Swapna Balgar

Author 4

3

Dr. P. V. Gopal Krishna

Author 1

1

Optimization of process parameter in submerged arc welding using cuckoo algorithm

International Journal Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / September-20.

scopus

https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3711914

Dr. K. Kishore

Author 2

G. Sravani

Author 3

4

Dr. P. V. Gopal Krishna

Author 1

1

Elastic buckling of aluminium (Al-2024-T3) plate with cut-out using numerical approach

Journal of Xi’an University of Architecture and Technology

1006-7930

12 /  Oct-2020.

scopus

https://www.xajzkjdx.cn/gallery/4-oct2020.pdf

Dr. K. Kishore

Author 2

Amith Yadav

Author 3

5

Dr. A. Srinivas

Author 1

1

Analysis of thermally stratified hot water storage tanks by energy principle

High Technology Letters

1006-6748

26 / October-20.

-

-

6

M.Venugopal Reddy*,                 P.Harshita, S.Sreshta

Author 1                  Author 2          Author 3

1

DESIGN AND ANALYSIS OF NON-PNEUMATIC HEXAGONAL TYRE

High Technology Letters

1006-6749

26 / October-20.

-

-

7

Suda Venkateswarulu

Author 1

1

DESIGN OF HVAC SYSTEM FOR OPERATION THEATRES USING HEAT RECOVERY WHEEL

High Technology Letters

1006-6749

26 / October-20.

-

-

8

Dr. K. Kishore

Author 1

1

Optimization of Process Parameters in Abrasive Water Jet Machining by Taguchi Method

High Technology Letters

1006-6749

26 / October-20.

-

-

Dr. P. V. Gopal Krishna

Author 2

K. Udaya Kumar

Author 3

K, Suresh Naik

Author 4

V. Mani Kumar

Author 5

9

N. Shivateja, P. Siva Raju, Y. Vijay Kumar, N B Sambamurthy*

Author 1                  Author 2          Author 3               Author 4

3

NUMERICAL ANALYSIS OF CONJUGATE NATURAL CONVECTION IN HORIZONTAL CYLINDRICAL ANNULI FILLED WITH AIR AND HELIUM GAS

High Technology Letters

1006-6749

26 / October-20.

-

-

10

Md. Luqhman,                G. Srikanth,                     P. Nandita

Author 1                  Author 2          Author 3

1

PERFORMANCE ANALYSIS ON USING ACETONE,  METHANOL AND GASOLINE FUEL BLENDS IN SPARK
IGNITION ENGINE

High Technology Letters

1006-6749

26 / October-20.

-

-

11

VBS Rajendra Prasad    NAVEEN. M            PRANAY NEHANTH R     SHESHANK. C.

Author 1                  Author 2          Author 3               Author 4

1

OPTIMIZATION OF MACHINING PARAMETERS ON CNC TURN LATHE USING REGRESSION ANALYSIS

High Technology Letters

1006-6749

26 / October-20.

-

-

12

T. RamamohanRao            Nithin H.M                      C. J. Daniel                     Dulla Mayank

Author 1                  Author 2          Author 3               Author 4

1

DESIGN AND ANALYSIS OF AIRPLANE WING

High Technology Letters

1006-6749

26 / November-20.

-

-

13

T Krishnachaitanya*, Y. Shiva Kishore,             B. Srujan,                     V. Varun

Author 1                  Author 2          Author 3               Author 4

1

DESIGN AND ANALYSIS OF PUFFER ROBOT

High Technology Letters

1006-6749

26 / November-20.

-

-

14

K. Veladri                            Md. Dawood Ibrahim

Author 1                  Author 2        

2

Design and Analysis of 3 - Axis Delta Type Parallel Robot

High Technology Letters

1006-6749

26 / October-20.

-

-

15

Dr. C. Gururaja Rao          K. Aditya, A. Jaswant and Ch. Bhanu Kiran

Author 1                  Author 2          Author 3               Author 4

1

INTERACTION BETWEEN CONDUCTION-CONVECTION- RADIATION FROM AN L-CORNER WITH DISCRETE AND NON-IDENTICAL HEATING

High Technology Letters

1006-6749

26 / October-20.

-

-

16

S.Sreekrishna

Author 1             

1

DETERMINATION OF STRESS INTENSITY FACTOR FOR DIFFERENT CRACK SHAPES USING PLASTIC ZONE CONCEPT

High Technology Letters

1006-6749

26 / October-20.

-

-

17

P.Venkatswara Rao, H.H.D.S.S.Arun, Mohammed Khaja Akmal Pasha,                    Rudraraju Lokesh

Author 1                  Author 2          Author 3               Author 4

1

AERODYNAMIC ANALYSIS OF VERTICAL AXIS WIND TURBINE USING CFD

High Technology Letters

1006-6749

26 / October-20.

-

-

18

B. Sandeep, S. Bhanu Prasad, V. Rohith Kumar

Author 1                  Author 2          Author 3          

1

EXPERIMENTAL INVESTIGATION OF (Al2O3 + SiC + Gr)  REINFORCED AL7075 HYBRID METAL MATRIX COMPOSITES

High Technology Letters

1006-6749

26 / October-20.

-

-

19

M. Sudhkar

Author 1

1

DEVELOPMENT OF MULTICRITERIA MODEL TO SELECT EFFICIENT RENEWABLE BASED DESALINATION TECHNOLOGY AT REMOTE AREAS IN ANDHRA PRADESH – INDIA

International Journal of Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / September-20.

scopus

-

20

K. Kishore
P.V. Gopal krishna    E. Karunakar

Author 1                  Author 2          Author 3          

1

Optimization of Mechanical Properties of AISI 1040 Steel in Submerged Arc Welding Process

Journal of Xi'an University of Architecture & Technology

ISSN No : 1006-7930

Volume XII, Issue X, 2020

-

DOI: 10.34218/IJARET.11.9.2020.097

21

Dr. JALLEDA ANJANEYULU1, V. HARSHA VARDHAN2 & P.CHANDRA KUMAR3

Author 1                  Author 2          Author 3          

1

EVALUATION OF MECHANICAL BEHAVIOUR OF GLASS FIBRE-EPOXY WITH GRAPHENE NANO POWDER LAMINATES

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)

ISSN No. : 2249 - 6890

Vol. 10, Issue-3         June 2020

Scopus

22

M. Prabhukiran                K. Kishore
P.V. Gopal krishna    G. Ramadevudu

Author 1                  Author 2          Author 3               Author 4          

2

Productivity enhancement of Twist Drill Bit by Molybdenum Trioxide (MoO3) Nano-Coatings and Cry-Treatment

Solid State Technology

Volume 63, Issue 2s, 2020

Scopus

-

23

V.B.S. Rajendra Prasad                         Neha P

Author 1                  Author 2                

1

Investigation on sandwiched beams with EPDM rubber core for tensile and compressive behavior

Pensee

0031-4773

Volume 51, issue 3, 2021

Scopus

-

2019-20

National Journal Publications

nil

International Journal Publications

1

Dr. C. Gururaja Rao

Author 1

1

Fluid Flow and Heat Transfer Studies on a Discretely and Non-Identically Heated Electronic Board

Journal of Engineering Thermophysics

1810-2328

29 / March-20.

Scopus

[DOI: 10.1134/S1810232820010075]

Murali Yamala

Author 2

2

Dr. C. Gururaja Rao

Author 1

1

Buoyancy-Aided Conjugate Mixed Convection with Surface Radiation from a Vertical Channel with Multiple Non-Identical Discrete Heat Sources

International Journal for Computational Methods in Engineering Science and Mechanics

1024-123X  1563-5147

21 / March-20.

Scopus

[DOI: 10.1080/15502287.2020.1718799]

Abhijeet. P. Shah

Author 2

3

V.B.S. Rajendra Prasad

Author 1

1

Identification of Damping Characteristics of EPDM-RUBBER with applications to sandwiched beams and considerations to Engine Mounts for Performance Evaluation

Elsevier
Materials Today Proceedings

2214-7853

Jun-20

Scopus

https://doi.org/10.1016/j.matpr.2020.04.317

4

Dr. J. Anjaneyulu

Author 1

1

Evaluation of mechanical behaviour of glass fibre-epoxy with graphene nano powder laminates

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)

2249–6890

10 / June-20.

Scopus

10.24247/IJMPRD/JUNE-2020/299

V. Harsha Vardhan

Author 2

P. Chandra Kumar

Author 3

5

Dr. J. Anjaneyulu

Author 1

1

Design and analysis of a composite T-joint used in automobile chassis

International Journal of Scientific & Engineering Research

2229-5518

11 / April-20.

UGC

IJSER.ORG/RESEARCH PAPER/APRIL-2020

Niharika Kaza

Author 2

Prajwala Gavuji

Author 3

6

Prabhu Kiran Martha

Author 1

2

Lifetime and performance improvement of HSS drill bit by titania (TiO2) Nano-coatings and cryogenic treatment

International Journal of Engineering and Advanced Technology

2249-8958

8 / August-19.

Scopus

10.35940/ijeat.F8100.088619

K. Kishore

Author 2

G. Ramadevudu

Author 3

7

P. Venkateswara Rao

Author 1

2

Performance study of twisted vaned diffuser in compressor stage

Advances in engineering design and simulation

978-981-13-8467-7

Oct-19

UGC

https://doi.org/10.1007/978-981-13-8468-4_8

G.V. Ramana Murty

Author 2

B. Amog

Author 3

C. Pradeep Reddy

Author 4

8

Ch. Shekar

Author 1

2

Machining of inconel 718 by EDM using taguchi method for optimization of material removal rate and surface roughness

Internal Journal for Research in Applied Science and Engineering Technology

2321-9653

7 / October-19.

 10.1016/j.matpr.2020.01.372

Dr. K. Kishore

Author 2

P. Laxmi Narayana

Author 3

9

K. Manish Kumar

Author 1

2

Study Of Metallurgical and Mechanical Properties In Submerged Arc Welding With Different Composition Of
Fluxes-A Review

Elsevier
Materials Today Proceedings

22 / July-19.

Scopus

https://doi.org/10.1016/j.matpr.2020.03.351

Dr.P.V.Gopalkrishna

Author 2

Dr. K. Kishore

Author 3

10

Dr. J Anjaneyulu

Author 1

2

Evaluation of mechanical behavior of glass fibre-epoxy composite laminates

Elsevier
Materials Today Proceedings

22 / July-19.

Scopus

https://doi.org/10.1016/j.matpr.2020.03.423

Md Moizuddin

Author 2

P. Chandra Kumar

Author 3

11

Manojkumar Gudala

Author 1

6

Hydrodynamics and energy analysis of heavy crude oil transportation through horizontal pipelines using novel surfactant

Petroleum Science and Technology

0920-4105

178 / July-2019.

Scopus

https://doi.org/10.1016/j.petrol.2019.03.027

Shirsendu Banerjee

Author 2

Tarun Kumar Naiya

Author 3

Ajay Mandal

Author 4

Subbaiah T

Author 5

Dr. T. Ramamohan Rao

Author 6

12

R. Naresh

Author 1

2

Static and Trasient response of a leaf spring with EPDM rubber sanwitched between steel leaves

Elsevier
Materials Today Proceedings

22 / July-19.

Scopus

V.B.S. Rajendra Prasad

Author 2

G.Venkata Rao

Author 3

2018-19

National Journal Publications

1

Mithil Badam

Author 1

2

CNC plotter developed for plethora machining purposes

Journal of Innovations in Mechanical Engineering

2581-7019

2 / January-19.

http://www.indianjournals.com/ijor.aspx?target=ijor:ijme1&volume=2&issue=1&article=009

Dr. P.V.S. Subhashini

Author 2

International Journal Publications

1

Dr. P. Venkateswara Rao

Author 1

1

Effect of chord length of a low solidity vaned diffuser on the performance of a centrifugal compressor stage

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/10.pdg

Dr. G.V. Ramana Murty

Author 2

B. Amogh – student

Author 3

C. Pradeep Reddy

Author 4

2

Dr. P.V. Gopal Krishna

Author 1

1

Comparative performance evaluation of stepped and stepless drive in turning

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/06.pdf

Dr. K. Kishore

Author 2

K. Srinivasa Rao

Author 3

3

Dr. J. Anjaneyulu

Author 1

1

Design and analysis of automatic lifting and placing machine

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/101.pdf

K. Srinivasa Rao

Author 2

K. Jeevan Reddy

Author 3

4

Dr. P.V. Gopal Krishna

Author 1

1

No fault  forward of range counter shaft sub assembly

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/10.pdf

S. Sowmya

Author 2

5

V. Pavan Kumar Chary

Author 1

2

Design and analysis of piston using metal matrix composite (AlSiC)

International Journal of Research

2236-6124

May-19

http://www.iaeme.com/MasterAdmin/Journal_uploads/IJARET/VOLUME_11_ISSUE_8/IJARET_11_08_027.pdf

K. Srinivasa Rao

Author 2

6

Dr. P.V.S. Subhashini

Author 1

1

Motion analysis of a two link manipulator used in FDM

International Journal of Research

2232-6124

8

UGC

P. Venkata Raju

Author 2

T. Krishna Chaitanya

Author 3

7

M. Sudhakar

Author 1

1

Selection of an efficient desalination technology to treat brackish water for domestic application in metropolitan cities in India using multi-criteria analysis

International Journal of Industrial Engineering and Technology

9 / June-19.

UGC

10.24247/ijietjun20194

8

C P Hemanth Vema Reddy

Author 1

2

An experimental study of friction stir welding and dissimilar aluminum alloys

International Journal of Research

2236-6124

8 / June-19.

UGC

http://ijrpublisher.com/gallery/8-june-2019.pdf

B. Sandeep

Author 2

K. Kishore

Author 3

2017-18

National Journal Publications

nil

International Journal Publications

1

Dr. PV Gopal Krishna

Author 1

1

Design and analysis of Carbon Fiber Reinforced Composite Shell Structure using Classical Laminate Plate theory

British Journal of Applied Science  and Technology

-

20 / October/2017.

UGC

https://doi.org/10.9734/BJAST/2017/31981

Ms. Podila Meghana

Author 2

Mr. A.Sai Kumar

Author 3

Dr.K.Kishore

Author 4

2

Mr. G. Manoj Kumar

Author 1

3

Studies on the effect of bio additive on viscosity and energy requirement for heavy crude oil flow

International Journal of Petroleum Science and Technology in Mechanical Engineering

0920-4105

Dec-17

scopus

10.1080/10916466.2017.1405030

Mr. S. Banerjee

Author 2

Dr. T. Ram Mohan Rao

Author 3

Mr. N. Tarun

Author 4

Mr. M. Ajay

Author 5

3

Manojkumar Gudala

Author 1

4

Rheological modeling and drag reduction studies of Indian heavy crude oil in presence of novel surfactant

Petroleum Science and Technology

1091-6466

35 / Nov-2017.

Scopus

https://doi.org/10.1080/10916466.2017.1402034

Shirsendu Banerjee

Author 2

Amit Kumar

Author 3

Dr. T. Rama Mohan Rao

Author 4

Ajay Mandal

Author 5

Tarun Kumar Naiya

Author 6

4

Manojkumar Gudala

Author 1

3

The effect of a bio additive on the viscosity and the energy requirement on heavy crude oil flow

Petroleum Science and Technology

1091-6466

Dec-17

Scopus

10.1080/10916466.2017.1405030

Shirsendu Banerjee

Author 2

Dr. T. Rama Mohan Rao

Author 3

Tarun Kumar Naiya

Author 4

Ajay Mandal

Author 5

5

Mr. J. Anjaneyulu

Author 1

1

Design and dimensional analysis of Mechanisms

SSRG International journal of Mechanical Engineering(SSRG-IJME)

2348 – 8360

May 2017.

UGC

http://www.internationaljournalssrg.org/uploads/specialissuepdf/NCRAME/2017/ME/IJME-NCRAME-P113.pdf

Ms. Ashwini.V

Author 2

6

Dr. T. Ramamohan Rao

Author 1

1

Multi Objective Optimization of Turning Parameters for A1 6061 Using Genetic Algorithm

Journal of Metallurgy and Materials Science,1.07.2015

July-2017.

ugc

http://www.indianjournals.com/ijor.aspx?target=ijor:jmms&volume=57&issue=4&article=006

7

Manoj Kumar Gudala

Author 1

4

Experimental investigation on hydrodynamics of Two-phase crude oil flow in horizontal pipe with novel surfactant

Journal of Fluids Engineering

061302-1

140 / June 2018.

Scopus

 https://doi.org/10.1115/1.4039130

Shirsendu Banerjee

Author 2

Ravindra Kumar

Author 3

Dr. T. Rama Mohan Rao

Author 4

Ajay Mandal

Author 5

Tarun Kumar Naiya

Author 6

DEPARTMENT OF MECHANICAL ENGINEERING

S. No

Name of the Faculty as Author

No. of Authors

Main Author / Other

Title of the Paper

Name of the Conference

Conference - Date, Month and Year

Organised by with location

ISBN / ISSN No

URL / DOI

2023-24

International Conference Publications

1

G. Sree Lakshmi,
Dr. T. Ramamohan Rao,
K. Gurubrahman

Author 1                  Author 2          Author 3

1

Investigation on the Strategic Locations of Piezo for Maximum Voltage Generation in Electric Vehicle

International Conference on
Ambient Intelligence Knowledge Informatics and Industrial Electronics (AIKIIE-2023)

2-3 November 2023

Rao Bahadur Y. Mahabaleshwarappa Engineering College, Ballari,Karnataka

-

-

2

Sardar Jaspal Singh
Dr. K. Kishotre
Dr. P. Laxminaraya
Dr. A. Parasuramulu

Author 1                  Author 2          Author 3
Author 4

1

Investigation of micro structural and mechanical properties of friction surfacing on low carbon steel using stainless steel grades

International Conference and exposition on mechanical, material and manufacturing technology

October 28-29, 2022

CVR College of Engineerng, Hyderabad

-

https://doi.org/10.1016/j.matpr.2023.04.540

2022-23

International Conference Publications

1

V. Avaneesh Athreya,
P. Venkateswara Rao,
G.V. Ramana Murty

Author 1                  Author 2          Author 3

1

Numerical Studies on the Effect of the Lean Angle on a Vaned Diffuser in a Centrifugal Compressor Stage

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

2

K.Veladri,
Dr. G. Chandra Mohan Reddy,
Dr. P. Ramesh Babu

Author 1                  Author 2          Author 3

1

Hyper- Redundant Snake Robot Design and Modeling

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

3

B. V.S. Manish Gupta,
M. Hrushikesh,
S. Kirthana

Author 1                  Author 2          Author 3

1

Design of Prolate Ellipsoidal Dome for Underwater Missile Applications

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

4

D. Govinda Rao,
K. I. Spurgeon,
B. Naga Manohar

Author 1                  Author 2          Author 3

1

Design and Analysis of Milling Cutter Tool

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

5

V.B.S.Rajendra Prasad,
A. Durgavani

Author 1                  Author 2          Author 3

1

Non-linear Hyper Elastic Behaviour of Air Springs

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

6

K. I. Spurgeon,
D. Govinda Rao,
B. N. Manohar,
Sasanka Neti

Author 1                  Author 2          Author 3 Author 4

1

Allocation of Capacities to Optimize the Production of Vaccines

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

7

Dr. J. Anjaneyulu, Durgam Karna,
K. Srinivasa Rao

Author 1                  Author 2          Author 3

1

Design, Analysis, and Fabrication of Composite Mono-Leaf Spring

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

8

P. V. Gopala Krishna, P. Abhinav,
P. Chandra Kumar,
K. Kishore

Author 1                  Author 2          Author 3 Author 4

1

Investigating the Mechanical Properties of Graphene Based Nano-composites

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

9

Dr. J. Anjaneyulu,
K. Veladri,
Mohd. Shariuddin

Author 1                  Author 2          Author 3

1

Kinematic & Dynamic Analysis of 3 Link Robot Manipulator

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

10

K. Gurubrahmam,
Ch. Prabhakar Rao,
T. Rammohan Rao,
M. Chandra Sekhar Reddy

Author 1                  Author 2          Author 3 Author 4

1

Modal Analysis of Cancer Cell

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

11

M. Pandarinath,
Dr. T. Ramamohan Rao,
Dr. Sriram Venkatesh

Author 1                  Author 2          Author 3

1

Statistical Analysis of Musculoskeletal Disorders (MSD) and Work Related Risk Factors of Public Transport Drivers

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

12

PVS Subhashini,
A. Sumith Chandra,
C. Vijay Dev Reddy

Author 1                  Author 2          Author 3

1

Design and Structural Analysis of 4-DOF Manipulator

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

13

Dr. S. Venkataiah,
Shaik Uzeif,
Sayeed Khan,
Saifullah Khalid

Author 1                  Author 2          Author 3 Author 4

1

Performance Evaluation of a Two Stage Cascade Refrigeration Cycle Using R410A and R507a in HT Cycle with R744 in LT Cycle

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

14

Md Feroz
M. Venugopal Reddy

Author 1                  Author 2          Author 3

1

Design and Vibration Analysis of Two Wheelers Helical Spring Shock Absorbers

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

15

Dr. S. Venkataiah
G. Sthithapragna (Alumni)

Author 1                  Author 2

1

Comprehensive evaluation of nano refrigerants: A review

2nd International Conference and Exposition on Advances in Mechanical Engineering

28-29 June 2022

Collage of Engineering, Pune

Materials today proceedings

16

Dr. S. Venkataiah
Irukula Abnhinav
Koyyada Akhil (Alumni)

Author 1                  Author 2          Author 3

1

Design, modeling, analysis and fabrication of swiveling conveyor

2nd International Conference and Exposition on Advances in Mechanical Engineering

28-29 June 2022

Collage of Engineering, Pune

Materials today proceedings

17

Sardar Jaspal Singh
Dr. K. Kishore
P. Laxminarayana
A. Parshuramulu

Author 1                  Author 2          Author 3
Author 4

2

Investigation of micro structural and mechanical properties of friction surface on low carbon steel by using stainless steel  grades

Materials Today Proceedings

Materials today proceedings

2021-22

National Conference Publications

1

Dr. P.V.S. Subhashini

Author 1

1

Optimization of parameters  for deburring operation with SCARA

3rd National E-Conference on Emerging Trends in Mechanical Engineering (ETIME 2021)

28-29 Sept 2021

SNIST, Hyderabad

978-0-13-601970-1

2

Dr. P.V.S. Subhashini

Author 1

1

Mathematical derivation and validation of kinematics for 4-DOF manipulator

4th International Conference on Advances in Mechanical Engineering (ICAME 2022)

24-26 March 2022

SRM Institute of Science and Technology, SRM Nagar, Kattankulathur, Chengalpattu, TN-603203

2020-21

National Conference Publications

1

B. Sandeep                          V. Pramod
Abu Sufyan Malik       Aravind Reddy

Author 1                  Author 2          Author 3               Author 4          

1

Experimental and microstructural investigation of different welding processes on dissimilar metals

National Conference on Advances in Mechanical Engineering

27-28 May 2021

SVNIT, Surat

978-93-5473-914-9

International Conference Publications

nil

2019-20

National Conference Publications

nil

International Conference Publications

1

Dr. P. Venkateswara Rao

Author 1

1

CFD studies on a centrifugal compressor stage with twisted vanes of a low solidity diffuser.

International Conference on “Advances in Material Science and Mechanical Engineering” (ICAMSME-2020)

7-9 February 2020

N.B.K.R. Institute of Science & Technology, Vidyanagar-524413, SPSR Nellore Dist.

-

2

Ch. Shekar

Author 1

2

Material removal rate and surface roughness on machining of inconel 718 by electrical discharge machine using taguchi technique

Internal conference on Advanced Light-weight Materials and  Structures (ICALMS-2k20)

Oct-19

https://doi.org/10.1016/j.matpr.2020.01.372

Dr. K. Kishore

Author 2

P. Laxmi Narayana

Author 3

3

Ch. Shekar

Author 1

3

Optimization of process parameters on EDM for inconel 718

International conference on ICIME 2019

/ 2019.

U. Ashok Kumar

Author 2

Dr. K. Kishore

Author 3

P. Laxmi Narayana

Author 4

2018-19

National Conference Publications

1

Dr. J. Anjaneyulu

Author 1

1

Kinematic analysis of PUMA 762 manipulator

3rd national conference on Advances in Engineering, Technology and Sciences – NCAETS 2019

04.04.2019

Spoorthy Engineering College, Nadargul, Hyderabad

-

2

  K.Veladri
Dr.P.V.Gopalkrishna

Author-1 author-2

1

Recycling of iron and steel making by products: A review

 5th National Conference on Apllied Physiscs and Material Science 

7-8 the Sept 2018

Dept of Physics, VCE,Hyd

International Conference Publications

1

S.Kirthana

Author 1

1

Static structural analysis on femur bone using different plate materials

International Conference on Materials, Manufacturing and Modelling (ICMMM)

29-31 Mar 2019

VIT, Vellore

https://doi.org/10.1016/j.matpr.2020.03.354

2

S.Kirthana

Author 1

1

A FEA on  assemble fractured human femur bone with and without HA coated prosthetic plate material

International Conference on Materials, Manufacturing and Modelling (ICMMM)

29-31 Mar 2019

VIT, Vellore

https://doi.org/10.1016/j.matpr.2020.03.422

3

V.B.S. Rajendra Prasad

Author 1

1

Static and transient response of leaf  spring with EPDM rubber sandwiched between steel leaves

International Conference on Materials, Manufacturing and Modelling (ICMMM)

29-31 Mar 2019

VIT, Vellore

https://doi.org/10.1016/j.matpr.2020.03.286

R. Naresh

Author 2

Dr. G. Venkata Rao

Author 3

4

V.B.S. Rajendra Prasad

Author 1

1

Static and fatigue  analysis of  leaf spring with  rubber sandwiched steel layer

International Conference UICETE

29-31 Mar 2019

OU, Hyderabad

https://doi.org/10.1016/j.matpr.2020.03.286

5

Mrs. S. Kirthana

Author 1

1

Reconstruction of femur bone from DICOM files and FEA on fractured muman femur bone with PEEK thermoplastic prosthetic plate implantation

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

10.1007/978-981-13-8468-4_10

6

G. Pradeep Kumar

Author 1

2

Convergent modeling and FE based structural analysis of patient specific cranial implant in supine sleeping position

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

Dr. T. Ramamohan Rao

Author 2

7

B Shreya – BE student

Author 1

3

FDM and 3D modeling of patient specific cranial implant from DICOM images and finite element analysis of various infilled patterns

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

G. Pradeep Kumar – PG

Author 2

Dr. T. Ramamohan Rao

Author 3

8

Dr. P. Venkateswara Rao

Author 1

3

Performance study of twisted vaned diffuser in a compressor stage

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

Dr. G.V. Ramana Murty

Author 2

B. Amogh

Author 3

C. Pradeep Reddy

Author 4

J. Karthik Reddy

Author 5

9

V.B.S. Rajendra Prasad

Author 1

1

Dynamic response of rubber based sandwiched beams for impact loading

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

Md. Idrees

Author 2

10

Dr. P.V.S. Subhashini

Author 1

1

Parametric optimization of fused deposition modeling using multi objective techniques

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

Ms. G. Sneha

Author 2

Mrs. Ch. Amareswari

Author 3

11

Dr. P.V.S. Subhashini

Author 1

1

Modeling of two link manipulator used for 3D printing

NAFEMS Conference 2018
Engineering Modelling, Analysis, Simulation and 3D Printing

20-21 July, 2018

NAFEMS, Bengaluru, India

Prof. B. Anjaneya Prasad

Author 2

Mrs. Navaneetha Kasa

Author 3

12

V.B.S. Rajendra Prasad

Author 1

1

Identification                  of damping characteristics of EPDM and application of engine mounts for performance evaluation

International Conference on Advances in Materials and Manufacturing Applications-IConAMMA-2018

17-18 August 2018

Amrita Vishwa Vidyapeetham, Bengaluru

13

Md Idrees

Author 1

2

Response of Rubber based Engine Mounts with SBR as Core rubber

IOP Conference Material Science and Engineering

10.1088/1757-899x/455/1/012108

V.B.S. Rajendra Prasad

Author 2

2017-18

National Conference Publications

1

Dr. S. Venkataiah

Author 1

1

Thermodynamics analysis of two stage cascade refrigeration system using natural refrigerants

National Conference on Advances in Mechanical Engineering & Nano Technology (AMENT 2018)

29-30 June 2018

UCE (A), OU, Hyderabad

International Conference Publications

1

Dr. P.V.S. Subhashini

Author 1

1

A review on fused deposition modeling

1st International Conference on Innovations in Mechanical Engineering (ICIME-2018)

5-6 January 2018

Gurunanak Institution of Technology

G. Sneha

Author 2

2

S. Kirthana

Author 1

1

Finite element analysis and  topology optimization of engine mounting bracket

ICMPC-2018

16-18 March 2018

Gokaraju Rangaraju Institute of Engineering & Technology

Mohammed Khaja Nizamuddin

Author 2

DEPARTMENT OF MECHANICAL ENGINEERING

S. No

Name of the Faculty as Author

Total Authors in the order of appearance

Main Author / Other

Title of the Paper

Name of the Journal

ISBN / ISSN No

Vol / Month & Yr.

Indexing No. UGC / Scopus

URL / DOI

2023-24

National Journal Publications

nil

International Journal Publications

1

V  Sumanraju

Author 1

Constant Steam Inlet Conditions and their Impact on the Thermal Efficiency of a
Cogeneration Power Plant

International Journal of Heat and Technology

-

Vol. 41, No. 4, August, 2023, pp. 847-853

Scopus

https://doi.org/10.18280/ijht.410407

Dr. T. Ramamohan Rao

Author 2

Narasimhulu Sanke

Author 3

2

K. Santhosh Kumar

Author 1

Harmonizing Muffler Design: The Virtuoso
Performance based on Inlet Diameter, Outlet Diameter and Material in Orchestrating Transmission Loss

Journal of Propulsion Technology

1001-4055

Vol. 44 No. 4 (2023)

-

-

Dr. K. Kishore

Author 2

Dr. P. Ushasri

Author 3

3

Yamala Muralikrishna

Author 1

Parametric and comparative studies on fluid flow and heat transfer from uniformily and non uniformily heated plates

SPRINGER NATURE International Journals : Journal of Thermal Analysis and Calorimetry [JTAC]

-

07.12.2023

SCOPUS, SCI and SCIE

https://doi.org/10.1007/s10973-023-12730-z

Dr. C. Gururaja Rao

Author 2

4

Dr. C. Gururaja Rao

Author 1

Interactive influence of conduction-convection-Radiation on heat transfer from a discretely anf non identically heated elrctronic gadget

SPRINGER NATURE International Journals :Journal of Engineering Thermophysics [JET]

Accepted on 26.10.2023

SCOPUS and SCIE

K. Aditya

Author 2

5

V  Sumanraju

Author 1

Optimization of process parameters for enhancing overall efficiency: Experiment analysis and regression modeling

International Journal of Interactive Design and Manufacturing

-

13-Dec-23

Scopus

https://doi.org/10.1007/s12008-023-01626-9

Dr. T. Ramamohan Rao

Author 2

Narasimhulu Sanke

Author 3

6

Mukesh Kumar Tripati
Dhanunjay Makteder
DN Vasundhara
Dr. Ch VKNSN Moorthy
Preeti Patil
Shivendra

Author 1
Author 2
Author 3
Author 4
Author 5
Author 6

Residual life assessment (RLA) analysis of apple disease based on multimodal deep learning model

International journal of intellegence systems and applications in engineering

21476799

Nov-23

scopus

7

Koteswara Rao B
Kodanda Rama Rao Ch
V Srinivas
Dr. Ch VKNSN Moorthy
Gandhi Pullajura

Author 1
Author 2
Author 3
Author 4
Author 5

PhysicoiChemical and tribological prpperties of commercial oil-bio-lubricant mixures dispersed with graphene nanoplatelets

RSC Advances

8

Myneni Madhubala
D N Vasundhara
Akkineni Haritha
Dr. Ch VKNSN Moorthy

Author 1
Author 2
Author 3
Author 4

Design development and analysis of cognitive assisting aid with multisensor fused navigation for visually in paired people

Journal of big data

9

Markndeyulu Vuggirala
N Alagappan
Dr. Ch VKNSN Moorthy

Author 1
Author 2
Author 3

The role of nanofluids in the performance augmentation for the solar collectors used in solar water heating

International Journal of Ambient Energy

Scopus

10

K Pavan Kumar
Y Suresh
Pesn Krishna Prasad
Dr. Ch VKNSN Moorthy
A S Sai Prasad

Author 1
Author 2
Author 3
Author 4
Author 5

Image feature encoding using lownerization tensor

Journal of Theoritical and Applied Information Technology

1992-8645

Scopus

11

Harith A
Madhu bala M
B.Padmaja
Dr. Ch VKNSN Moorthy
Ravi Teja CMS

Author 1
Author 2
Author 3
Author 4
Author 5

Analysis of data privacy and anonymity aspects of contact tracing apps via smartphones - A use case of COVID -19

Journal of multimedia

12

D. Veerababu
C. Sachin
P. V. S. Subhashini
B. Venkatesham

Author 1
Author 2
Author 3
Author 4

Acoustic Modeling and Analysis of Automotive Air- Filters

Article  in  The International Journal of Acoustics and Vibration

Vol. 28, No. 4, 2023 (pp. 353–361) Dec-2023

Scopus

 10.20855/ijav.2023.28.41959

2022-23

National Journal Publications

nil

International Journal Publications

1

Dr. S. Venkataiah

Author 1

1

Investigation of intercooler fins of a two stage reciprocating air compressor

UPB Scientific Bulletin, Series D: Mechanical Engineering

1454-2358

Vol.84, Issue-4, 2022

Scopus

https://www.scientificbulletin.pub.ro/rev_docs_arhiva/rezdd1_896970.pdf

G. Sthithapragna

Author 2

N Nagaraju

Author 3

K. Vivek yadav

Author 4

2

Guru Brahmam

Author 1

Study on added damping due to resistive shunting on cantilever, simply supported beam, and effect on the variation of amplitude at resonance.

Journal of Mechanical Engineering Science

-

-

Scopus

doi:10.1177/09544062221132186
02.11.2022

Dr. T. Ramamohan Rao

Author 2

M. Chanddra Sekhar Reddy

Author 3

3

Guru Brahmam

Author 1

Sensitive analysis on aided damping of shunted piezoceramic damping: Cantilever and simply supported beam

Journal of Vibroengineering

-

-

Scopus

Accepted on 08.12.2022

Dr. T. Ramamohan Rao

Author 2

M. Chanddra Sekhar Reddy

Author 3

4

Dr. S. Venkataiah

Author 1

Performance evaluation of vapour compression refrigeration system for a air conditioning applications using R-22 and R-410A as refrigerants various evoparating termperatures

International Journal for Research and Development in Technology

2349-3585

Vol. 18, issue 6, DEC-2022

Peer Reviewed

5

Dr. S. Venkataiah

Author 1

Performance evaluation of vapour compression refrigeration cycle for airconditioning applications with R-22, R-290 and R-600a as refrigerants

International Journal Research Publication and Reviews

2582-7421

Peer Reviewed

6

Dr. PV Rao

Author 1

1

Three dimensional studeis on flow distributions in savonious rotors

International Research Journal of Engineering and Technology

2395-0056 (e)
2395-0072(p)

Vol. 9, issue 11, Nov-2022

Peer Reviewed

7

Dr. PV Rao

Author 1

1

Numerical Investigations on Savonious Wind Rotors

International Journal for Research and Development in Technology

2349-3585

Vol. 18, issue 6, DEC-2022

Peer Reviewed

8

Dr. PV Rao

Author 1

1

Effect of environmental factors on the performance of savonious wind rotor

International Journal of Scientific Research and Engineering Trends

2395-566X

Vol. 8, issue 6, NOV-DEC-2022

Peer Reviewed

9

Dr. Ch.V.K.N.S.N. Moorthy

Author 4

Other

Numerical study Bio-Inspired Corrugated Airfoil Geometry in a Forward Flight at a Low Reynolds Numbers

WSEAS Transactions on Fluid Mechanics

2224-347X

Vol. 17, July 2022

Scopus

Doi:10.37394/232013.2022.17.12

10

Guru Brahmam

Author 1

Study on Prediction of Added Damping from Inclined PZT‑5 H
for Bending and Torsional Modes

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering

Scopus

Accepted on 03.03.2023

Dr. T. Ramamohan Rao

Author 2

M. Chanddra Sekhar Reddy

Author 3

11

Dr. K. Kishore

Author 1

A review on enhancement of developing noiceless suction muffler for reciprocating compressor

International Journal of Mechanical Engineering

2367-8968

Jun-23

Peer Reviewed

12

Dr. Ch.V.K.N.S.N. Moorthy
A. Srivastav
DN Vasundhara
V Suryanarayana Reddy
AS Sai Prasad

Author 1
Author 2
Author 3
Author 4
Author 5

Robotics process automation - The Ineluctable virtual workforce in various business sectors: Post covid-19 scenario

International Journal of Engineering Trends and Technology

2231-5381

Mar-23

13

S. Bhanutaja
V Srinivas
Dr. Ch.V.K.N.S.N. Moorthy
J Sai Kumar
B Laxmipathi Raju

Author 1
Author 2
Author 3
Author 4
Author 5

Prediction of thermophysical properties of hybrid nanofluids using machine learning algorithms

International Journal Interactive Design and Manufacturing

Apr-23

14

B Padmaja
Dr. Ch VKNSN Moorthy
N. Venkateswarulu
Myneni Madhubala

Author 1
Author 2
Author 3
Author 4

Exploration of issues, challenges and latest developments in autonomous cars

Journal of big data

Scopus

2021-22

National Journal Publications

nil

International Journal Publications

1

Dr. K. Kishore

Author 1

1

Condition monitoring and flow control of cutting fluid using IoT for drilling operation

International Journal of Creating Research Toughts

2320-2882

Vol.9, Issue-10, Oct-2021

-

https://ijcrt.org/papers/IJCRT2110015.pdf

H. Rohit

Author 2

2

Dr. P.V.S. Subhashini

Author 1

1

Parametric optimization of fused depositon modeling using multi objective techniques

Journal of Nano Technology and Smart materials

Vol.7, Issue-105, pp 1-12; Mar 2022

-

Parametric-Optimization-of-Fused-Deposition.pdf (jscholarpublishers.com)

G. Sneha

Author 2

3

Jayanth Burri

Author 1

5

Desing and analysis of chasis for a FSAE Car

International Journal of Engineering Research Technology

2278-0181

Vol.10, Issue 11, pp 369-373   Nov-2021

-

DOI : 10.17577/IJERTV10IS110177

Anirudh Kyatham

Author 2

Sriram Kata

Author 3

Koushik Alapati

Author 4

Dr. P.V.S. Subhashini

Author 5

4

K. Anirudh,

Author 1

4

Design and Analysis of Suspension System For An FSAE Car

Turkish Online Journal of Qualitatuve Inquiry (TOJQI)

Volume 12, Issue 9, August 2021, Pages: 4693-4706

-

View of Design and Analysis of Suspension System for an FSAE car (tojqi.net)

K. Sriram, 

Author 2

B. Jayanth

Author 3

J. Anjaneyulu

Author 4

5

1. K. Anirudh,

Author 1

4

Design And Kinematic Analysis Of Suspension System For A Formula Society Of Automotive Engineers (FSAE) Car

Journal of Engineering Research and Reports

2582-2926

Article no.JERR.75066: 21(2), October 2021, pages: 48-63

-

DOI:10.9734/jerr/2021/v21i217445

K. Sriram, 

Author 2

B. Jayanth

Author 3

J. Anjaneyulu

Author 4

-

-

2020-21

National Journal Publications

nil

International Journal Publications

1

Dr. S. Venkataiah

Author 1

1

performance evaluation of two stage cascade refrigeration system using natural refrigerants

International Journal Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / August-20.

Scopus

10.34218/IJARET.11.8.2020.64

2

K. Srinivasa Rao

Author 1

1

Design and analysis of piston made of magnesium silicon carbide (MGSIC)

International Journal Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / August-20.

Scopus

10.34218/IJARET.11.8.2020.027

Sushmitha Podugu

Author 2

Sri Sai Sathwika

Author 3

Swapna Balgar

Author 4

3

Dr. P. V. Gopal Krishna

Author 1

1

Optimization of process parameter in submerged arc welding using cuckoo algorithm

International Journal Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / September-20.

scopus

https://papers.ssrn.com/sol3/papers.cfm?abstract_id=3711914

Dr. K. Kishore

Author 2

G. Sravani

Author 3

4

Dr. P. V. Gopal Krishna

Author 1

1

Elastic buckling of aluminium (Al-2024-T3) plate with cut-out using numerical approach

Journal of Xi’an University of Architecture and Technology

1006-7930

12 /  Oct-2020.

scopus

https://www.xajzkjdx.cn/gallery/4-oct2020.pdf

Dr. K. Kishore

Author 2

Amith Yadav

Author 3

5

Dr. A. Srinivas

Author 1

1

Analysis of thermally stratified hot water storage tanks by energy principle

High Technology Letters

1006-6748

26 / October-20.

-

-

6

M.Venugopal Reddy*,                 P.Harshita, S.Sreshta

Author 1                  Author 2          Author 3

1

DESIGN AND ANALYSIS OF NON-PNEUMATIC HEXAGONAL TYRE

High Technology Letters

1006-6749

26 / October-20.

-

-

7

Suda Venkateswarulu

Author 1

1

DESIGN OF HVAC SYSTEM FOR OPERATION THEATRES USING HEAT RECOVERY WHEEL

High Technology Letters

1006-6749

26 / October-20.

-

-

8

Dr. K. Kishore

Author 1

1

Optimization of Process Parameters in Abrasive Water Jet Machining by Taguchi Method

High Technology Letters

1006-6749

26 / October-20.

-

-

Dr. P. V. Gopal Krishna

Author 2

K. Udaya Kumar

Author 3

K, Suresh Naik

Author 4

V. Mani Kumar

Author 5

9

N. Shivateja, P. Siva Raju, Y. Vijay Kumar, N B Sambamurthy*

Author 1                  Author 2          Author 3               Author 4

3

NUMERICAL ANALYSIS OF CONJUGATE NATURAL CONVECTION IN HORIZONTAL CYLINDRICAL ANNULI FILLED WITH AIR AND HELIUM GAS

High Technology Letters

1006-6749

26 / October-20.

-

-

10

Md. Luqhman,                G. Srikanth,                     P. Nandita

Author 1                  Author 2          Author 3

1

PERFORMANCE ANALYSIS ON USING ACETONE,  METHANOL AND GASOLINE FUEL BLENDS IN SPARK
IGNITION ENGINE

High Technology Letters

1006-6749

26 / October-20.

-

-

11

VBS Rajendra Prasad    NAVEEN. M            PRANAY NEHANTH R     SHESHANK. C.

Author 1                  Author 2          Author 3               Author 4

1

OPTIMIZATION OF MACHINING PARAMETERS ON CNC TURN LATHE USING REGRESSION ANALYSIS

High Technology Letters

1006-6749

26 / October-20.

-

-

12

T. RamamohanRao            Nithin H.M                      C. J. Daniel                     Dulla Mayank

Author 1                  Author 2          Author 3               Author 4

1

DESIGN AND ANALYSIS OF AIRPLANE WING

High Technology Letters

1006-6749

26 / November-20.

-

-

13

T Krishnachaitanya*, Y. Shiva Kishore,             B. Srujan,                     V. Varun

Author 1                  Author 2          Author 3               Author 4

1

DESIGN AND ANALYSIS OF PUFFER ROBOT

High Technology Letters

1006-6749

26 / November-20.

-

-

14

K. Veladri                            Md. Dawood Ibrahim

Author 1                  Author 2        

2

Design and Analysis of 3 - Axis Delta Type Parallel Robot

High Technology Letters

1006-6749

26 / October-20.

-

-

15

Dr. C. Gururaja Rao          K. Aditya, A. Jaswant and Ch. Bhanu Kiran

Author 1                  Author 2          Author 3               Author 4

1

INTERACTION BETWEEN CONDUCTION-CONVECTION- RADIATION FROM AN L-CORNER WITH DISCRETE AND NON-IDENTICAL HEATING

High Technology Letters

1006-6749

26 / October-20.

-

-

16

S.Sreekrishna

Author 1             

1

DETERMINATION OF STRESS INTENSITY FACTOR FOR DIFFERENT CRACK SHAPES USING PLASTIC ZONE CONCEPT

High Technology Letters

1006-6749

26 / October-20.

-

-

17

P.Venkatswara Rao, H.H.D.S.S.Arun, Mohammed Khaja Akmal Pasha,                    Rudraraju Lokesh

Author 1                  Author 2          Author 3               Author 4

1

AERODYNAMIC ANALYSIS OF VERTICAL AXIS WIND TURBINE USING CFD

High Technology Letters

1006-6749

26 / October-20.

-

-

18

B. Sandeep, S. Bhanu Prasad, V. Rohith Kumar

Author 1                  Author 2          Author 3          

1

EXPERIMENTAL INVESTIGATION OF (Al2O3 + SiC + Gr)  REINFORCED AL7075 HYBRID METAL MATRIX COMPOSITES

High Technology Letters

1006-6749

26 / October-20.

-

-

19

M. Sudhkar

Author 1

1

DEVELOPMENT OF MULTICRITERIA MODEL TO SELECT EFFICIENT RENEWABLE BASED DESALINATION TECHNOLOGY AT REMOTE AREAS IN ANDHRA PRADESH – INDIA

International Journal of Advanced Research in Engineering and Technology (IJARET)

0976-6480

11 / September-20.

scopus

-

20

K. Kishore
P.V. Gopal krishna    E. Karunakar

Author 1                  Author 2          Author 3          

1

Optimization of Mechanical Properties of AISI 1040 Steel in Submerged Arc Welding Process

Journal of Xi'an University of Architecture & Technology

ISSN No : 1006-7930

Volume XII, Issue X, 2020

-

DOI: 10.34218/IJARET.11.9.2020.097

21

Dr. JALLEDA ANJANEYULU1, V. HARSHA VARDHAN2 & P.CHANDRA KUMAR3

Author 1                  Author 2          Author 3          

1

EVALUATION OF MECHANICAL BEHAVIOUR OF GLASS FIBRE-EPOXY WITH GRAPHENE NANO POWDER LAMINATES

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)

ISSN No. : 2249 - 6890

Vol. 10, Issue-3         June 2020

Scopus

22

M. Prabhukiran                K. Kishore
P.V. Gopal krishna    G. Ramadevudu

Author 1                  Author 2          Author 3               Author 4          

2

Productivity enhancement of Twist Drill Bit by Molybdenum Trioxide (MoO3) Nano-Coatings and Cry-Treatment

Solid State Technology

Volume 63, Issue 2s, 2020

Scopus

-

23

V.B.S. Rajendra Prasad                         Neha P

Author 1                  Author 2                

1

Investigation on sandwiched beams with EPDM rubber core for tensile and compressive behavior

Pensee

0031-4773

Volume 51, issue 3, 2021

Scopus

-

2019-20

National Journal Publications

nil

International Journal Publications

1

Dr. C. Gururaja Rao

Author 1

1

Fluid Flow and Heat Transfer Studies on a Discretely and Non-Identically Heated Electronic Board

Journal of Engineering Thermophysics

1810-2328

29 / March-20.

Scopus

[DOI: 10.1134/S1810232820010075]

Murali Yamala

Author 2

2

Dr. C. Gururaja Rao

Author 1

1

Buoyancy-Aided Conjugate Mixed Convection with Surface Radiation from a Vertical Channel with Multiple Non-Identical Discrete Heat Sources

International Journal for Computational Methods in Engineering Science and Mechanics

1024-123X  1563-5147

21 / March-20.

Scopus

[DOI: 10.1080/15502287.2020.1718799]

Abhijeet. P. Shah

Author 2

3

V.B.S. Rajendra Prasad

Author 1

1

Identification of Damping Characteristics of EPDM-RUBBER with applications to sandwiched beams and considerations to Engine Mounts for Performance Evaluation

Elsevier
Materials Today Proceedings

2214-7853

Jun-20

Scopus

https://doi.org/10.1016/j.matpr.2020.04.317

4

Dr. J. Anjaneyulu

Author 1

1

Evaluation of mechanical behaviour of glass fibre-epoxy with graphene nano powder laminates

International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)

2249–6890

10 / June-20.

Scopus

10.24247/IJMPRD/JUNE-2020/299

V. Harsha Vardhan

Author 2

P. Chandra Kumar

Author 3

5

Dr. J. Anjaneyulu

Author 1

1

Design and analysis of a composite T-joint used in automobile chassis

International Journal of Scientific & Engineering Research

2229-5518

11 / April-20.

UGC

IJSER.ORG/RESEARCH PAPER/APRIL-2020

Niharika Kaza

Author 2

Prajwala Gavuji

Author 3

6

Prabhu Kiran Martha

Author 1

2

Lifetime and performance improvement of HSS drill bit by titania (TiO2) Nano-coatings and cryogenic treatment

International Journal of Engineering and Advanced Technology

2249-8958

8 / August-19.

Scopus

10.35940/ijeat.F8100.088619

K. Kishore

Author 2

G. Ramadevudu

Author 3

7

P. Venkateswara Rao

Author 1

2

Performance study of twisted vaned diffuser in compressor stage

Advances in engineering design and simulation

978-981-13-8467-7

Oct-19

UGC

https://doi.org/10.1007/978-981-13-8468-4_8

G.V. Ramana Murty

Author 2

B. Amog

Author 3

C. Pradeep Reddy

Author 4

8

Ch. Shekar

Author 1

2

Machining of inconel 718 by EDM using taguchi method for optimization of material removal rate and surface roughness

Internal Journal for Research in Applied Science and Engineering Technology

2321-9653

7 / October-19.

 10.1016/j.matpr.2020.01.372

Dr. K. Kishore

Author 2

P. Laxmi Narayana

Author 3

9

K. Manish Kumar

Author 1

2

Study Of Metallurgical and Mechanical Properties In Submerged Arc Welding With Different Composition Of
Fluxes-A Review

Elsevier
Materials Today Proceedings

22 / July-19.

Scopus

https://doi.org/10.1016/j.matpr.2020.03.351

Dr.P.V.Gopalkrishna

Author 2

Dr. K. Kishore

Author 3

10

Dr. J Anjaneyulu

Author 1

2

Evaluation of mechanical behavior of glass fibre-epoxy composite laminates

Elsevier
Materials Today Proceedings

22 / July-19.

Scopus

https://doi.org/10.1016/j.matpr.2020.03.423

Md Moizuddin

Author 2

P. Chandra Kumar

Author 3

11

Manojkumar Gudala

Author 1

6

Hydrodynamics and energy analysis of heavy crude oil transportation through horizontal pipelines using novel surfactant

Petroleum Science and Technology

0920-4105

178 / July-2019.

Scopus

https://doi.org/10.1016/j.petrol.2019.03.027

Shirsendu Banerjee

Author 2

Tarun Kumar Naiya

Author 3

Ajay Mandal

Author 4

Subbaiah T

Author 5

Dr. T. Ramamohan Rao

Author 6

12

R. Naresh

Author 1

2

Static and Trasient response of a leaf spring with EPDM rubber sanwitched between steel leaves

Elsevier
Materials Today Proceedings

22 / July-19.

Scopus

V.B.S. Rajendra Prasad

Author 2

G.Venkata Rao

Author 3

2018-19

National Journal Publications

1

Mithil Badam

Author 1

2

CNC plotter developed for plethora machining purposes

Journal of Innovations in Mechanical Engineering

2581-7019

2 / January-19.

http://www.indianjournals.com/ijor.aspx?target=ijor:ijme1&volume=2&issue=1&article=009

Dr. P.V.S. Subhashini

Author 2

International Journal Publications

1

Dr. P. Venkateswara Rao

Author 1

1

Effect of chord length of a low solidity vaned diffuser on the performance of a centrifugal compressor stage

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/10.pdg

Dr. G.V. Ramana Murty

Author 2

B. Amogh – student

Author 3

C. Pradeep Reddy

Author 4

2

Dr. P.V. Gopal Krishna

Author 1

1

Comparative performance evaluation of stepped and stepless drive in turning

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/06.pdf

Dr. K. Kishore

Author 2

K. Srinivasa Rao

Author 3

3

Dr. J. Anjaneyulu

Author 1

1

Design and analysis of automatic lifting and placing machine

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/101.pdf

K. Srinivasa Rao

Author 2

K. Jeevan Reddy

Author 3

4

Dr. P.V. Gopal Krishna

Author 1

1

No fault  forward of range counter shaft sub assembly

Global Journal of Engineering Science and Researches

2348-8034

DEC-2018.

UGC

gjesr.com/issues%20PDF/ICAME-2018/10.pdf

S. Sowmya

Author 2

5

V. Pavan Kumar Chary

Author 1

2

Design and analysis of piston using metal matrix composite (AlSiC)

International Journal of Research

2236-6124

May-19

http://www.iaeme.com/MasterAdmin/Journal_uploads/IJARET/VOLUME_11_ISSUE_8/IJARET_11_08_027.pdf

K. Srinivasa Rao

Author 2

6

Dr. P.V.S. Subhashini

Author 1

1

Motion analysis of a two link manipulator used in FDM

International Journal of Research

2232-6124

8

UGC

P. Venkata Raju

Author 2

T. Krishna Chaitanya

Author 3

7

M. Sudhakar

Author 1

1

Selection of an efficient desalination technology to treat brackish water for domestic application in metropolitan cities in India using multi-criteria analysis

International Journal of Industrial Engineering and Technology

9 / June-19.

UGC

10.24247/ijietjun20194

8

C P Hemanth Vema Reddy

Author 1

2

An experimental study of friction stir welding and dissimilar aluminum alloys

International Journal of Research

2236-6124

8 / June-19.

UGC

http://ijrpublisher.com/gallery/8-june-2019.pdf

B. Sandeep

Author 2

K. Kishore

Author 3

2017-18

National Journal Publications

nil

International Journal Publications

1

Dr. PV Gopal Krishna

Author 1

1

Design and analysis of Carbon Fiber Reinforced Composite Shell Structure using Classical Laminate Plate theory

British Journal of Applied Science  and Technology

-

20 / October/2017.

UGC

https://doi.org/10.9734/BJAST/2017/31981

Ms. Podila Meghana

Author 2

Mr. A.Sai Kumar

Author 3

Dr.K.Kishore

Author 4

2

Mr. G. Manoj Kumar

Author 1

3

Studies on the effect of bio additive on viscosity and energy requirement for heavy crude oil flow

International Journal of Petroleum Science and Technology in Mechanical Engineering

0920-4105

Dec-17

scopus

10.1080/10916466.2017.1405030

Mr. S. Banerjee

Author 2

Dr. T. Ram Mohan Rao

Author 3

Mr. N. Tarun

Author 4

Mr. M. Ajay

Author 5

3

Manojkumar Gudala

Author 1

4

Rheological modeling and drag reduction studies of Indian heavy crude oil in presence of novel surfactant

Petroleum Science and Technology

1091-6466

35 / Nov-2017.

Scopus

https://doi.org/10.1080/10916466.2017.1402034

Shirsendu Banerjee

Author 2

Amit Kumar

Author 3

Dr. T. Rama Mohan Rao

Author 4

Ajay Mandal

Author 5

Tarun Kumar Naiya

Author 6

4

Manojkumar Gudala

Author 1

3

The effect of a bio additive on the viscosity and the energy requirement on heavy crude oil flow

Petroleum Science and Technology

1091-6466

Dec-17

Scopus

10.1080/10916466.2017.1405030

Shirsendu Banerjee

Author 2

Dr. T. Rama Mohan Rao

Author 3

Tarun Kumar Naiya

Author 4

Ajay Mandal

Author 5

5

Mr. J. Anjaneyulu

Author 1

1

Design and dimensional analysis of Mechanisms

SSRG International journal of Mechanical Engineering(SSRG-IJME)

2348 – 8360

May 2017.

UGC

http://www.internationaljournalssrg.org/uploads/specialissuepdf/NCRAME/2017/ME/IJME-NCRAME-P113.pdf

Ms. Ashwini.V

Author 2

6

Dr. T. Ramamohan Rao

Author 1

1

Multi Objective Optimization of Turning Parameters for A1 6061 Using Genetic Algorithm

Journal of Metallurgy and Materials Science,1.07.2015

July-2017.

ugc

http://www.indianjournals.com/ijor.aspx?target=ijor:jmms&volume=57&issue=4&article=006

7

Manoj Kumar Gudala

Author 1

4

Experimental investigation on hydrodynamics of Two-phase crude oil flow in horizontal pipe with novel surfactant

Journal of Fluids Engineering

061302-1

140 / June 2018.

Scopus

 https://doi.org/10.1115/1.4039130

Shirsendu Banerjee

Author 2

Ravindra Kumar

Author 3

Dr. T. Rama Mohan Rao

Author 4

Ajay Mandal

Author 5

Tarun Kumar Naiya

Author 6

2016-17

National Journal Publications

nil

International Journal Publications

1

Murali Yamala

Author 2

1

Simulation Studies on Buoyancy-Aided Conjugate Mixed Convection with Radiation from a Vertical Plate with Multiple Non-Identical Heat Sources

Heat Transfer Engineering

38 / Jan-2017.

Dr. C. Gururaja Rao

Author 1

2

Mr. J. Anjaneyulu

Author 1

1

Variation of a resonant frequency due to static structural loads on a ring laser gyroscope with mechanical ring dither

International Research Journal of Engineering and Technology (IRJET)

2395-0072

4 / April-17.

UGC

https://www.irjet.net/archives/V4/i4/IRJET-V4I4757.pdf

Mr. C. Narsimhma Reddy

Author 2

Mr.  M.Santosh Kumar

Author 3

3

K. Venkata Rao

Author 1

1

Variation of resonant frequency due to thermal and loading conditions on torsion bar dither mechanism in ring laser gyroscope

International Journal of Engineering Development and Research

2321-9939

5/2017.

UGC

https://www.ijedr.org/papers/IJEDR1702129.pdf

K. Veladri

Author 2

C. Narsimha Reddy,

Author 3

4

Dr. PVS Subhashini

Author 1

1

Parametric Optimization of force during turning Process on Mild steel

International Journal of Engineering Research in Mechanical and Civil Engineering (JERMCE)

2 / May-2017.

Mrs.T.Roopa

Author 2

5

Dr. PVS Subhashini

Author 1

1

A review on SCARA manipulator for various applications

International Journal of Engineering Research in Mechanical and Civil Engineering (JERMCE)

2456-1290

2 / May-2017.

UGC

01.1617/vol4/iss5/pid26514

L. Sai Sandeep

Author 2

E.Karunakar

Author 3

Dr. N.V.S. Raju

Author 4

6

Mr. Y. Nithin Chandra Manas

Author 1

2

Design development analysis and simulation of Gimball integrated vehicle

International Journal of Engineering Research in Mechanical and Civil Engineering (JERMCE)

2 / May-2017.

UGC

Dr.PVS Subhashini

Author 2

Mr. R Krishna Teja

Author 3

7

N. Amulya, PG student

Author 1

1

Parametric Optimization of Heat Generation during Turning Operation

Journal of Mechanical Engineering and Automation 6 (5A)

2163-2405

Vol. 6; pp. 117-120; 20.3.2017

scopus

http://article.sapub.org/10.5923.c.jmea.201601.22.html

Dr. P.V.S. Subhashini

Author 2

Dr. N.V.S. Raju

Author 3

Dr. G. Venkata Rao

Author 4

2015-16

National Journal Publications

nil

International Journal Publications

1

Ms. K. Chinmayi

Author 1

1

Kinematic analysis of SCARA Robot for deburring of rectangular paths

International Journal of Scientific and Engineering Research,

ISSN: 2229-5518

Vol.7, Issue 6, Pp.57 to 62, , June 2016

UGC

https://www.ijser.org/researchpaper/Kinematic-analysis-of-a-SCARA-robot-for-deburring-of-rectangular-paths.pdf

Mrs. P.V.S. Subhashini

Author 2

Dr. G. Venkata Rao

Author 3

Dr. N.V.S. Raju

Author 4

2

Dr. P.V.S. Subhashini

Author 1

1

Videographic Analysis of a SCARA Robot for Deburring of Rectangular Path

Journal of Mechanical Engineering and Automation 6 (5A)

2163-2405

Vol. 6; pp. 109-112; 6.6.2016

scopus

http://article.sapub.org/10.5923.c.jmea.201601.20.html

Dr. N.V.S. Raju

Author 2

Dr. G. Venkata Rao

Author 3

K. Chinmayi, Alumni

Author 4

3

Dr. T. Ramamohan Rao

Author 1

1

Studies on flow of emulsified crude oil through horizontal pipelines

Journal of Modern Chemistry & Chemical Technology

2321–5208

2016

UGC

http://www.stmjournals.com/index.php?journal=JoMCCT&page=article&op=view&path%5B%5D=7197

4

Mounika Nayudu                  V.B.S. Rajendra Prasad         G. Venkata Rao

Author 1                  Author 2                       Author 3

2

On the evaluation of best fit hiper elastic model for sandwich beem with SB rubber core

International Journal of Scientific and Engineering Research,

2229-5518

Vol. 7 , Issue-5, 2016

-

-

2014-15

National Journal Publications

nil

International Journal Publications

1

J. Anjaneyulu

Author 1

1

Theoretical and Experimental Dynamic Analysis of High Speed Mechanism of a Switch Gear

International Journal of Applied Engineering Research

ISSN: 0973-4562

Vol. 10, No.2 (2015)

ugc

ripublication.com/volume/ijaervion3.html

G. Venkata Rao

Author 2

G. Krishnamohar Rao

Author 3

2

A. Srikanth

Author 1

1

Design and Fabrication of Drill Chuck for Making a Square Hole

Journal of Material Science and Mechanical Engineering (JMS        ME)

ISSN: 2393-9095

Vol.2, NO.5  April-June 2015;

ugc

https://www.ijedr.org/papers/IJEDR1702254.pdf

S. Sreekrishna

Author 2

V.B.S. Rajendra Prasad

Author 3

DEPARTMENT OF MECHANICAL ENGINEERING

S. No

Name of the Faculty as Author

No. of Authors

Main Author / Other

Title of the Paper

Name of the Conference

Conference - Date, Month and Year

Organised by with location

ISBN / ISSN No

URL / DOI

2023-24

International Conference Publications

1

G. Sree Lakshmi,
Dr. T. Ramamohan Rao,
K. Gurubrahman

Author 1                  Author 2          Author 3

1

Investigation on the Strategic Locations of Piezo for Maximum Voltage Generation in Electric Vehicle

International Conference on
Ambient Intelligence Knowledge Informatics and Industrial Electronics (AIKIIE-2023)

2-3 November 2023

Rao Bahadur Y. Mahabaleshwarappa Engineering College, Ballari,Karnataka

-

-

2

Sardar Jaspal Singh
Dr. K. Kishotre
Dr. P. Laxminaraya
Dr. A. Parasuramulu

Author 1                  Author 2          Author 3
Author 4

1

Investigation of micro structural and mechanical properties of friction surfacing on low carbon steel using stainless steel grades

International Conference and exposition on mechanical, material and manufacturing technology

October 28-29, 2022

CVR College of Engineerng, Hyderabad

-

https://doi.org/10.1016/j.matpr.2023.04.540

2022-23

International Conference Publications

1

V. Avaneesh Athreya,
P. Venkateswara Rao,
G.V. Ramana Murty

Author 1                  Author 2          Author 3

1

Numerical Studies on the Effect of the Lean Angle on a Vaned Diffuser in a Centrifugal Compressor Stage

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

2

K.Veladri,
Dr. G. Chandra Mohan Reddy,
Dr. P. Ramesh Babu

Author 1                  Author 2          Author 3

1

Hyper- Redundant Snake Robot Design and Modeling

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

3

B. V.S. Manish Gupta,
M. Hrushikesh,
S. Kirthana

Author 1                  Author 2          Author 3

1

Design of Prolate Ellipsoidal Dome for Underwater Missile Applications

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

4

D. Govinda Rao,
K. I. Spurgeon,
B. Naga Manohar

Author 1                  Author 2          Author 3

1

Design and Analysis of Milling Cutter Tool

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

5

V.B.S.Rajendra Prasad,
A. Durgavani

Author 1                  Author 2          Author 3

1

Non-linear Hyper Elastic Behaviour of Air Springs

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

6

K. I. Spurgeon,
D. Govinda Rao,
B. N. Manohar,
Sasanka Neti

Author 1                  Author 2          Author 3 Author 4

1

Allocation of Capacities to Optimize the Production of Vaccines

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

7

Dr. J. Anjaneyulu, Durgam Karna,
K. Srinivasa Rao

Author 1                  Author 2          Author 3

1

Design, Analysis, and Fabrication of Composite Mono-Leaf Spring

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

8

P. V. Gopala Krishna, P. Abhinav,
P. Chandra Kumar,
K. Kishore

Author 1                  Author 2          Author 3 Author 4

1

Investigating the Mechanical Properties of Graphene Based Nano-composites

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

9

Dr. J. Anjaneyulu,
K. Veladri,
Mohd. Shariuddin

Author 1                  Author 2          Author 3

1

Kinematic & Dynamic Analysis of 3 Link Robot Manipulator

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

10

K. Gurubrahmam,
Ch. Prabhakar Rao,
T. Rammohan Rao,
M. Chandra Sekhar Reddy

Author 1                  Author 2          Author 3 Author 4

1

Modal Analysis of Cancer Cell

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

11

M. Pandarinath,
Dr. T. Ramamohan Rao,
Dr. Sriram Venkatesh

Author 1                  Author 2          Author 3

1

Statistical Analysis of Musculoskeletal Disorders (MSD) and Work Related Risk Factors of Public Transport Drivers

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

12

PVS Subhashini,
A. Sumith Chandra,
C. Vijay Dev Reddy

Author 1                  Author 2          Author 3

1

Design and Structural Analysis of 4-DOF Manipulator

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad

978-93-93259-89-9

-

13

Dr. S. Venkataiah,
Shaik Uzeif,
Sayeed Khan,
Saifullah Khalid

Author 1                  Author 2          Author 3 Author 4

1

Performance Evaluation of a Two Stage Cascade Refrigeration Cycle Using R410A and R507a in HT Cycle with R744 in LT Cycle

International Conference on
Advanced Materials and Computational Methods in Mechanical Engineering (ICAMCMME-2022)

11th & 12th November 2022
(Online)

Department of Mechanical Engg., VCE, Hyderabad